Olympus 262010 E-3 Instruction Manual (English) - Page 66
WB bracketing
UPC - 050332160569
View all Olympus 262010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
TIPS After pressing the shutter button, [WB NG RETRY] is displayed: j When there is not enough white in the image, or when the image is too bright, too dark or the colors look unnatural, you cannot register the white balance. Change the aperture and shutter speed settings, then repeat the procedure from Step 1. WB bracketing Three images with different white balances (adjusted in specified color directions) are automatically created from one shot. One image has the specified white balance, while the others are the same image adjusted in different color directions. Direct button WB + MODEk: EV step in A-B direction/ j: EV step in G-M direction • Use the sub dial to set in the A-B direction or the main dial to set in the G-M direction. Menu Setting display 5 MENU[X][WB BKT] EV step in the G-M direction: 2STEP Record mode, white balance, and picture mode Viewfinder EV step in the A-B direction: 4STEP Control panel • Select from [OFF], [3F 2STEP], [3F 4STEP], or [3F 6STEP] for the EV step for both the A-B (amber-blue) direction and the G-M (green-magenta) direction. • When the shutter button is pressed down all the way, 3 images adjusted in specified color directions are automatically created. WB BKT A-B 3F 4STEP G-M 3F 4STEP SELECT GO Direct buttons setting screen TIPS To apply WB bracketing to the white balance you have adjusted: j Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to the white balance you have adjusted. x Notes • During WB bracketing, the camera cannot shoot in sequence if there is not enough memory in the camera and card for storing more than the selected number of frames. 66 EN