Olympus 262010 E-3 Instruction Manual (English) - Page 56
Sequential shooting
UPC - 050332160569
View all Olympus 262010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
e.g.) The camera focuses using the center AF target. AF target 2 While pressing the shutter button halfway, move to the desired composition and press the button all the way. 4 • The card access lamp blinks while the picture is being stored on the card. AF confirmation mark Focusing and shooting functions If the subject has lower contrast than its surroundings If the contrast of the subject is weak, such as when the lighting is insufficient or the subject cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on a high-contrast object the same distance away as the intended subject, recompose your shot and then take the picture. Sequential shooting Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed (normal shooting mode). Sequential shooting H l Shoots at 5 frames/sec. for as long as the shutter button is pressed (during JPEG). Sequential shooting L O Shoots at the set speed (g"O fps" (P. 94)) for as long as the shutter button is pressed. • Press the shutter button fully and keep it pressed. The camera will take pictures in sequence until you release the button. • Focus, exposure, and white balance are locked at the first frame (during S-AF, MF). Number of sequential shots that can be taken x Notes • During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save all of the pictures depending on how much battery power remains. 56 EN