Olympus C2040Z C-2040 Zoom Reference Manual - Page 121
Shoot the pictures so that the edges of the subject overlap., When you have finished, using Panorama
UPC - 050332132382
View all Olympus C2040Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Panorama mode 6 Shoot the pictures so that the edges of the subject overlap. q You can use up to 10 shots to create a panorama picture. Custom Photography Take the shots so that the right edge of the shot (or the left edge when left overlapping is selected) overlaps the next shot. 7 When you have finished using Panorama mode, press the (Menu) but- ton. q The frame on the screen disappears and the camera reverts to normal shooting mode. 7 4 6 • Panorama mode is available only when an Olympus brand standard card is used. • The camera itself cannot create composite panorama images. You must use the CAMEDIA Master software. • The focus, exposure and white balance are set in the first picture. For this reason, do not make the first frame overly bright by including the sun or another light source in the shot. • Do not use the Zoom lever after shooting the first picture. This can cause problems with picture linking. • If you take a large number of panorama shots in HQ or SHQ mode, you may run short of memory on your computer. Use SQ mode to avoid this problem. • The flash cannot be used in the Panorama mode. • Pictures taken in TIFF (uncompressed) mode are recorded as SHQ mode images. 121