Olympus C2040Z C-2040 Zoom Reference Manual - Page 28

Attaching the strap and lens cap Use the procedure below to attach the strap and lens cap to the camera. 1 1 Thread the cord through the lens cap in the direc- tion indicated by the arrow in the figure. 2 Thread the strap through the lens cap cord. Getting Started 3 Then thread the strap through strap mount. 4 Thread the strap through the loop and fastener as indicated by the arrows in the figure. Then check that the strap does not loosen or come undone when pulled. 5 Repeat steps 3 and 4 to attach the strap to the mount on the other side of the camera. Strap eyelet Fastener • When the camera is hanging by its strap, ensure that it is not weighed down by other objects. This could result in personal injury or damage to the camera. • Take care to attach the strap correctly as described above. If the strap is attached incorrectly in any way and the camera comes loose or is dropped as a result, Olympus accepts no liability whatsoever for any injury or damage that may arise. 28