Olympus C2040Z C-2040 Zoom Reference Manual - Page 205
When the camera is connected to a computer, an error message appears, during data transfer.
UPC - 050332132382
View all Olympus C2040Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Troubleshooting Problem: When the camera is connected to a computer, an error message appears during data transfer. Cause Solution See qThe cable is not connected correctly. wThe camera is switched off. eThere are no batteries in the cam- era. rThe USB driver is not correctly installed. qCheck that the cable is connected correctly. wSet the Mode dial to " ". eLoad new batteries or use the optional AC adapter. rCheck whether the camera is cor- rectly recognized by the computer, as laid out in the USB driver (or CAMEDIA Master) installation guide. P.194 P.196 P.29,33 10 Miscellaneous 205
205
10
Miscellaneous
Troubleshooting
Problem:
Cause
Solution
See
When the camera is connected to a computer, an error message appears
during data transfer.
q
The cable is not connected cor-
rectly.
w
The camera is switched off.
e
There are no batteries in the cam-
era.
r
The USB driver is not correctly
installed.
q
Check that the cable is connected
correctly.
w
Set the Mode dial to "
".
e
Load new batteries or use the
optional AC adapter.
r
Check whether the camera is cor-
rectly recognized by the computer,
as laid out in the USB driver (or
CAMEDIA
Master)
installation
guide.
P.194
P.196
P.29,33