Optoma HD7100 User Manual - Page 20

Using the Adjustment Feet Use the adjustment feet to level the projector when it is placed on an uneven surface or when the screen is slanted. The projection can be made higher by adjusting the projector when it is in a location lower than the screen. 1 Press the foot releases and lift the projector to the desired angle. 2 Remove your hands from the foot releases. When the adjustment feet have locked in position, place the projector down. • If the screen is at an angle, the adjustment feet can be used to adjust the angle of the image. Notes • The projector is adjustable up to approximately 11 degrees from the standard position. • When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. See page 44 for details on keystone correction. Info • When lowering the projector, be careful not to catch your fingers in the area between the adjustment foot and the projector. Foot releases Adjustment feet Connections and Setup 20