Panasonic AG-MSU10 Operating Instructions
Panasonic AG-MSU10 Manual
 |
View all Panasonic AG-MSU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic AG-MSU10 manual content summary:
- Panasonic AG-MSU10 | Operating Instructions - Page 1
Operating Instructions Mobile Storage Unit Model No. AG-MSU10P Model No. AG-MSU10E Before operating this product, please read the instructions carefully and save this manual for future use. SS0810KT0 -PS D Printed in Japan ENGLISH VQT2Z29 - Panasonic AG-MSU10 | Operating Instructions - Page 2
Read this first! (AG-MSU10P and AG-MSU10E) indicates safety information. WARNING: • To reduce the require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug. Note: Mobile Storage Unit The - Panasonic AG-MSU10 | Operating Instructions - Page 3
Number: AG-MSU10P Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: . To assure continued compliance, follow the attached installation instructions and do not make any unauthorized modifications. CAUTION: - Panasonic AG-MSU10 | Operating Instructions - Page 4
you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. How to replace the fuse 1. Open the fuse compartment with a screwdriver. 2. Replace the fuse Fuse - Panasonic AG-MSU10 | Operating Instructions - Page 5
you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. How to replace the fuse 1. Open the fuse compartment with a screwdriver. 2. Replace the fuse Fuse - Panasonic AG-MSU10 | Operating Instructions - Page 6
of the battery for disposal at the end of its service life, please consult your dealer. Pursuant to at the directive 2004/108/EC, article 9(2) Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany - Panasonic AG-MSU10 | Operating Instructions - Page 7
Introduction Preparation Operations Connections Setup Read this first! (AG-MSU10P and AG-MSU10E 2 Overview...9 Standard accessories 9 Optional units 9 Precautions 10 AG-MSU10 10 AG-MBX10G interface box 11 AC adapter 11 Battery 11 Control Reference Guide 12 Front and Rear View 12 Top...13 - Panasonic AG-MSU10 | Operating Instructions - Page 8
41 Interface Box Interface Box Setup 42 Installing an SSD (Solid State Drive 42 Attaching the Silicone Jacket 42 Control Reference Guide 43 Connecting the Interface Box to a Personal Computer 44 For long and Trouble-free Operation Internal Battery 45 Error Messages 45 Before Requesting - Panasonic AG-MSU10 | Operating Instructions - Page 9
. Standard accessories • AG-MBX10G removable interface box ...1 • Operating instructions (this manual)...1 • CD-ROM (P2 driver, P2 card manager, install manual, operating instructions (this manual 1 • Battery (5400 mAh) (CGA-D54 for the AG-MSU10P / CGA-D54s for the AG-MSU10E 1 • Battery charger - Panasonic AG-MSU10 | Operating Instructions - Page 10
Precautions AG-MSU10 Secure deletion of data from memory cards and storage devices -language) text.) To obtain the source codes, go to the following home page: https://eww.pavc.panasonic.co.jp/pro-av/ The manufacturer asks users to refrain from directing inquiries concerning the source codes they - Panasonic AG-MSU10 | Operating Instructions - Page 11
drive in the interface box. AC adapter Use the supplied AC adapter. Read the Operating Instructions before use. "Connecting the Power Cable" (page 16 ). Battery Use the supplied battery. (CGA-D54 for the AG-MSU10P / CGA-D54s for the AG-MSU10E) Battery characteristics This unit uses a rechargeable - Panasonic AG-MSU10 | Operating Instructions - Page 12
Control Reference Guide Front and Rear View Front view 1 2 34 Rear view 5 6 a 1. P2 card slot This slot is designed for P2 cards. Before inserting a P2 card, make sure - Panasonic AG-MSU10 | Operating Instructions - Page 13
. Access LEDs P2: The LED is on when a P2 card is inserted and flashes when it is accessed. STORAGE: The LED is on when the drive in the interface box or an external storage unit is connected for copying and flashes when any of the - Panasonic AG-MSU10 | Operating Instructions - Page 14
of a hard disk drive or solid state drive with an eSATA connector using the unit as host device. For details, refer to "Selecting Storage De- vice" (page 25). 20. Security lock slot Used for attaching security cables. For details on connection, refer to the instruction manual supplied with - Panasonic AG-MSU10 | Operating Instructions - Page 15
Preparation Preparation Charging the battery The battery is not charged when the product is purchased. Use the steps below to fully charge the battery using the supplied charger. 1 Place the battery level on the charger and slide it in the direction of the arrows on the charger. 2 Connect the AC - Panasonic AG-MSU10 | Operating Instructions - Page 16
Connecting and Disconnecting the Battery and the Power Cable Connecting the Battery 1 Slide in the battery until it clicks into place. Connecting the Power Cable 1 Connect the AC power supply cable to the AC adapter, and then connect the power plug to a wall outlet. 2 Slide in the DC power supply - Panasonic AG-MSU10 | Operating Instructions - Page 17
Preparation NOTE: • Disconnect the AC power supply cable from the wall outlet when the unit is not used. • The power lamp on the AC adpater will remain lit for a few moments after the AC power supply cable is disconnected. This is not a malfunction. 17 - Panasonic AG-MSU10 | Operating Instructions - Page 18
Turning the Unit on and off Use the supplied battery or AC adapter to power the unit. For details, refer to "Connecting the Battery" (page 16). For details, refer to "Connecting the Power Ca- ble" (page 16). Make sure that the battery or the AC adapter is properly connected to the unit. Turn - Panasonic AG-MSU10 | Operating Instructions - Page 19
Preparation Calendar and Time Settings Use the following steps to set the time before you start using the unit. 1 Turn the unit on. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to select [SET- TING] [CLOCK SET] and press the SET button. • The Time setting screen appears. ( - Panasonic AG-MSU10 | Operating Instructions - Page 20
Inserting and Removing a P2 Card Inserting a P2 Card 1 Insert a P2 card in the P2 card slot. • Press in the card until the EJECT button pops up. ヮユワヶ EJECT button Removing a P2 Card 1 Flip up the EJECT button in the direction of the arrow. 2 Press the EJECT button. • - Panasonic AG-MSU10 | Operating Instructions - Page 21
Removing Interface Boxes Install a commercially sold SSD (Solid State Drive) in the AG-MBX10G removable interface box before use. For box when the unit is on, may damage the unit, the interface box or the SSD. NOTE: • Always turn the unit off before installing the interface box. Installing - Panasonic AG-MSU10 | Operating Instructions - Page 22
: • Do not use battery power, but the AC adapter for ERASE ALL since it writes data to the drive to delete all data, which takes considerable time. • To use an SSD after an ERASE ALL operation, format it selecting either TYPE S or FAT. 1 Make sure that TARGET in the main screen is - Panasonic AG-MSU10 | Operating Instructions - Page 23
Operations Operations Copy Screen Control Reference Guide 1 2 3 4 7 5 8 6 1. Screen name Indicates the name of indication Displays warning messages when operating errors, or problems with the unit, P2 cards, storage devices and other hardware problems occur. For details, refer to "Error - Panasonic AG-MSU10 | Operating Instructions - Page 24
and playback are not guaranteed. We recommend replacing the P2 card. DIR ENTRY NG CARD: The directory structure of the P2 card is not supported. The card may still function, but we recommend backing up the card data immediately and formatting the card before using it again. 8. Interface information - Panasonic AG-MSU10 | Operating Instructions - Page 25
Store (AJ-PCS060G) × × × hard disk. Cannot be used for writing data. OTHER NTFS, HFS+, ext3 or other file system other than FAT16 or FAT32. *1: This filenames are not supported. Example: of the button will change the destination drive in the following order. INTERNAL (interface - Panasonic AG-MSU10 | Operating Instructions - Page 26
Copying All Clips on a P2 Card Pressing the START button during the main screen displayed allows you to copy all files on a card to a storage device. Copying All Clips on a P2 Card 1 Turn the unit ON and select the storage device to copy the clips to. For details, refer to "Selecting Storage - Panasonic AG-MSU10 | Operating Instructions - Page 27
Operations Partition type and copy results Partition type Copy result Number of P2 cards that can be copied*2 TYPE S A separate partition is created for each card and all data on 23 the card is copied to this partition. The Explore screen on the unit allows you to check the model number and - Panasonic AG-MSU10 | Operating Instructions - Page 28
Selecting Clips for Copying This unit allows you to select specific clips on a P2 card or a storage device to copy to a storage device or a P2 card rather than copying all clips at one time. Use thumbnail view to select the clips you want to copy. Thumbnail Screen Operations Opening P2 Card - Panasonic AG-MSU10 | Operating Instructions - Page 29
Operations Thumbnail Screen 1 6 5 13 12 2 X! 3 4 5 MP T EW 7 8 9 10 11 1. Display status Indicates the type of thumbnails that are displayed on the screen. ALL All clips SELECT MARKER TEXT MEMO Clips selected with the SET button Clips with shot markers Clips with text memo data 2. - Panasonic AG-MSU10 | Operating Instructions - Page 30
11. Wide indicator W Indicates a clip recorded in the 16:9 aspect ratio. This is not indicated for an HD format clip. 12. Incomplete clip indicator ! Indicates a clip spanning multiple P2 cards where one of the cards that contains part of the clip has not been inserted. 13. Bad clip indicator X - Panasonic AG-MSU10 | Operating Instructions - Page 31
Operations Changing the indicators that appear Use the steps below to switch thumbnail display indicators and data settings. Changing Time Indication Use the steps below to change the type of time indication. 1 Press the MENU button and use the 1 Press the MENU button and use the cursor - Panasonic AG-MSU10 | Operating Instructions - Page 32
includes a GLOBAL CLIP ID. (F3) button and press cursor (up/down) buttons VIDEO Video signal system to move the cursor to the first or last clip. AUDIO Audio channel system 3) and other information ACCESS The date of the last update and other infor- 1) mation 2) DEVICE Serial - Panasonic AG-MSU10 | Operating Instructions - Page 33
Operations NOTE: • Clip metadata displayed as detailed information for clips on a P2 card can also be revised. As shown in the figure below, data that can be revised is indicated as "TEXT". Use the cursor buttons to move to the item you want to change and press the SET button to open a - Panasonic AG-MSU10 | Operating Instructions - Page 34
5 Use the cursor buttons to select [YES] and press the SET button. • Selecting [YES] starts clip copying and displays a progress bar. • Selecting [NO] cancels copying. Copying Clips on a Storage Device 1 Press the CHANGE TARGET (F1) button in the main screen to select the storage device you want - Panasonic AG-MSU10 | Operating Instructions - Page 35
Operations NOTE: • Use the steps below to set a buzzer that will notify you when copying ends, when the device is powered up and of any errors that might occur. Select [SETTING] [BUZZER] from the menu. For details, refer to "Menu list" (page 38). • A message notifying completion or - Panasonic AG-MSU10 | Operating Instructions - Page 36
Formatting P2 Cards 1 Open the menu in the main screen or in the P2 thumbnail screen. 2 Press the menu button and use the cursor buttons to select [OPERATION] [FORMAT (P2)]. 3 Use the cursor buttons to select [YES] and press the SET button in the confirmation screen that appears. • Selecting [YES] - Panasonic AG-MSU10 | Operating Instructions - Page 37
Panasonic's website, allows you to manipulate clips stored on a P2 card with a Windows PC. NOTE: • Make a USB 2.0 connection • For details regarding connections, refer to the instruc- tion manuals supplied with the PC and the application high-speed access to the SSD in the interface box slot. - Panasonic AG-MSU10 | Operating Instructions - Page 38
(P2) COPY(INT./USB/eSATA) FORMAT(P2) FORMAT(INT./USB/eSATA) CHANGE PARTITION NAME DELETE LAST PARTITION DELETE FOLDER COPY LOG HOUR METER SYSTEM INFO VERIFY BUZZER LCD BACKLIGHT LCD TIMEOUT AUTO POWER OFF DATE FORMAT CLOCK SET MENU RESET (Submenu) INDICATOR DATA DISPLAY NOTE: • To initialize - Panasonic AG-MSU10 | Operating Instructions - Page 39
Setup THUMBNAIL Menu ALL CLIP SELECTED CLIPS MARKED CLIPS TEXT MEMO CLIPS SETUP Submenu INDICATOR DATA DISPLAY OPERATION Menu DELETE COPY(P2) COPY(INT./USB/eSATA) FORMAT(P2) FORMAT(INT./USB/eSATA) CHANGE PARTITION NAME DELETE LAST PARTITION DELETE FOLDER Setting Shows all clips Shows only clips - Panasonic AG-MSU10 | Operating Instructions - Page 40
has been turned on. Shows the version of software installed in this unit. Setting Use the settings below to determine whether or not the system should automatically compare the original P2 card data with data copied to the storage device when using TYPE S formatting for copying. ON: Compares data - Panasonic AG-MSU10 | Operating Instructions - Page 41
and copying results, select [SETTING] [MENU RESET] from the menu and press the SET button. • Use this function to view the version of the system. • Use the cursor (left/right) buttons to check detailed version data. For details, refer to "Menu list" (page 38). • The copy result history is - Panasonic AG-MSU10 | Operating Instructions - Page 42
the AG-MBX10G Interface Box allows the user to copy data recorded on a P2 card camera-recorder to the SSD. USB bus power operation makes use of the AC adapter unnecessary. In addition to a USB 2.0 connection, the unit also provides a high-speed eSATA connection. Installing an SSD (Solid State Drive - Panasonic AG-MSU10 | Operating Instructions - Page 43
Guide Interface Box 1. AG-MSU10 connector Connector for connecting the interface box to the AG-MSU10 Mobile Storage Unit. 2. USB 2.0 connector (POWER connector) Use the USB cable to connect this connector to a USB 2.0 connector on a personal computer to power the drive SSD. 43 - Panasonic AG-MSU10 | Operating Instructions - Page 44
in the AG-MSU10, check that no important data remains and format the SSD using the FAT format. In Explorer (Windows) or the Finder (Macintosh), select the drive and load the files (copy or create anew). (Copy about 100 MB worth of files to the SSD.) A USB bus power can be used to power the system - Panasonic AG-MSU10 | Operating Instructions - Page 45
For long and Trouble-free Operation For long and Trouble-free Operation Internal Battery The internal battery be shut down, all POWER, P2 and STORAGE LEDs will start to flash.) Follow the instructions given in the error message to resume operation after an error has occurred. If the battery - Panasonic AG-MSU10 | Operating Instructions - Page 46
space on a P2 card or storage device used as the copy target. Use a P2 card or storage device with sufficient free space. LAST COPY FAILED. Last copy operation failed. Copy the data again. LAST COPY Last copy operation was successful. - SUCCESSFUL. LAST FORMAT FAILED. LAST FORMAT - Panasonic AG-MSU10 | Operating Instructions - Page 47
or format operation failed due to Copy or format again. a system control error. Too many clips are selected. Reduce the number of an unknown clip (clip version not supported by this unit) or a bad clip. An unsupported DVD drive or unsupported device is connected. The Trouble-free Operation 47 - Panasonic AG-MSU10 | Operating Instructions - Page 48
turn the power off and then back on again. Displayed when a system controller command was not observed. To continue operation, turn the power the battery. Indicates that the directory structure of the P2 card is not supported. Immediately make a backup of card data and reformat the card. Indicates - Panasonic AG-MSU10 | Operating Instructions - Page 49
to operate normally, first check the following information. If the problem still persists, consult your supplier. Power supply issues Symptom Check of its service life when it depletes quickly, even after being fully charged. Page reference Refer to page 15 For long and Trouble-free Operation - Panasonic AG-MSU10 | Operating Instructions - Page 50
or the P2 card may no longer be possible to use in a P2 device. Drive: \ CONTENTS AUDIO CLIP ICON PROXY VIDEO VOICE LASTCLIP.TXT*1 All these folders are can be downloaded from the following website. https://eww.pavc.panasonic.co.jp/pro-av/support/desk/e/index.htm Follow the steps below to use - Panasonic AG-MSU10 | Operating Instructions - Page 51
×1 (Type A, supporting bus power) USB 2.0 DEVICE ×1 Type Mini-B eSATA HOST×1 P2 card slot × 1 AG-MBX10 interface box slot 11/16 inches) Mass: 135 g (0.3 lb) (Excluding SSD) Ambient operating temperature: 0 °C to 40 °C (32 °F × 1 Connector for connecting AG-MSU10 mobile storage unit × 1 - Panasonic AG-MSU10 | Operating Instructions - Page 52
and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
ENGLISH
SS0810KT0 -PS D
Printed in Japan
Operating Instructions
Mobile Storage Unit
Model No.
AG-MSU10P
Model No.
AG-MSU10E
Before operating this product, please read the instructions carefully and save this manual
for future use.
VQT2Z29