Panasonic AG-MSU10 Operating Instructions - Page 40

STATUS Menu COPY LOG HOUR METER SYSTEM INFO SETTING VERIFY Menu BUZZER LCD BACKLIGHT LCD TIMEOUT AUTO POWER OFF DATE FORMAT CLOCK SET MENU RESET 40 Setting Shows the history (log data) of copying results. Indicates the following time data. OPERATION: Indicates the number of hours that the unit has been on. LCD ON: Indicates backlight on time for the LCD monitor in hours. POWER ON: Indicates the number of times the power has been turned on. Shows the version of software installed in this unit. Setting Use the settings below to determine whether or not the system should automatically compare the original P2 card data with data copied to the storage device when using TYPE S formatting for copying. ON: Compares data after copying. The Verify process takes as long as copying. OFF: No comparison is made. Use the settings below to determine how the buzzer will notify you when copying ends, when the device is powered up and of any errors that might occur. ONCE: Sounds the buzzer once REPEAT: Continues sounding until an action is performed OFF: Buzzer is disabled Allows you to adjust LCD monitor backlight brightness. LIGHT: Normal DARK: Dark Make the settings below to have the LCD monitor automatically turn off after a specified time (approx. 5 min) of inactivity. ON: The LCD switches off automatically OFF: The LCD does switch off Make the settings below to set the time until auto power off is activated. Off/5 min/10 min/15 min/20 min/25 min/30 min The default setting is 10 min. You can change the order that Year, Month and Day are displayed. Y-M-D: Year, month and day order M-D-Y: Month, day, and year order D-M-Y: Day, month and year order Sets the calendar and time. Initializes menu settings and clears copy result logs. YES: Returns menu settings to their defaults and clears copy result history. NO: Cancels initialization