Panasonic AG-MSU10 Operating Instructions - Page 41
Displaying Unit Information, Log data, Operation time, Software Version
View all Panasonic AG-MSU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Displaying Unit Information Setup Log data The unit allows you to save the history (log data) of copying results. Use the steps below to check this log. 1 Turn the unit on. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to select [STA- TUS] [COPY LOG] and press the SET button. • The logs shown below appear. - Date and time of start of copying and result of copying - [Copy source] [Copy target] P2 card serial number or model name of storage device NOTE: • The unit saves Greenwich Mean Time. A change in the time zone changes the time indication accordingly. Operation time Indicates the time the unit has been in operation. 1 Turn the unit on. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to select [STA- TUS] [HOUR METER] and press the SET button. • Indicates the following time data. OPERATION Indicates the number of hours that the unit has been on. LCD ON Indicates backlight on time for the LCD monitor in hours. POWER ON Indicates the number of times the power has been turned on. 4 Press the EXIT button. • The menu reappears. Software Version Use this function to check the version of software used in this unit. 1 Turn the unit on. 2 Press the MENU button to open the menu. 4 Press the EXIT button. • The menu reappears. 3 Use the cursor buttons to select [STATUS] [SYSTEM INFO] and press the SET button. NOTE: • To initialize menus and copying results, select [SETTING] [MENU RESET] from the menu and press the SET button. • Use this function to view the version of the system. • Use the cursor (left/right) buttons to check detailed version data. For details, refer to "Menu list" (page 38). • The copy result history is automatically deleted starting 4 Press the EXIT button. from the oldest data to make place for new data. • The menu reappears. 41