Panasonic AG-MSU10 Operating Instructions - Page 46
Error message list, Message, Description, Measure, Check P2 card.
View all Panasonic AG-MSU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Error message list Message Description Measure CANNOT ACCESS CARD! An error occurred during P2 card access. Check P2 card. CANNOT ACCESS An error occurred during storage device Check storage device status and connec- access. tions. TARGET! CANNOT ACCESS! Last copy or format operation failed be- Check the P2 card or storage device and cause an error occurred on the P2 card or try again. storage device. CANNOT COPY! An error occurred on the P2 card or stor- Check the P2 card or storage device. age device during copying. CANNOT COPY! FORMAT STORAGE DEVICE TO FAT Copying cannot be completed because the partition selected as the copy target does not exist. Format the storage device using FAT or use a device with a formatted partition. CANNOT FORMAT! The P2 card or storage device cannot be Check the P2 card or storage device. formatted. CANNOT RECOGNIZE The storage device cannot be properly recognized. Reboot the storage device or connect a different device. STORAGE DEVICE! CARD ACCESS ERROR! An error occurred during P2 card access. Check P2 card. CARD IS EMPTY! The P2 card being used as the copy CANNOT COPY! source is empty. Copying cannot take place as there is no data on the copy source. DEVICE DISCONNECTED! Last copy or format operation failed because the P2 card or storage device was disconnected. Connect the device properly and try again. LACK OF CAPACITY! There is not enough free space on a P2 card or storage device used as the copy target. Use a P2 card or storage device with sufficient free space. LAST COPY FAILED. Last copy operation failed. Copy the data again. LAST COPY Last copy operation was successful. - SUCCESSFUL. LAST FORMAT FAILED. LAST FORMAT SUCCESSFUL. LOW BATTERY! NOT SELECTED! POWER LOST! Last format operation failed. Format the device again. Last format operation was successful. - The battery is running low. No clip is selected. Last copy or format operation failed because the power supply was interrupted. Replace the battery or connect the AC adapter. Select clips before copying. Replace the battery or connect the AC adapter and try again. 46