Panasonic AG-MSU10 Operating Instructions - Page 42

Interface Box Interface Box Setup Installing an SSD in the AG-MBX10G Interface Box allows the user to copy data recorded on a P2 card camera-recorder to the SSD. USB bus power operation makes use of the AC adapter unnecessary. In addition to a USB 2.0 connection, the unit also provides a high-speed eSATA connection. Installing an SSD (Solid State Drive) 4 Close the top lid and secure the lid using the five 2 mm screws removed in step 1. 1 Remove the five screws in the interface box and remove the top lid. Back side Back side Use a No. 0 Phillips screwdriver to remove the screws. Use a No. 0 Phillips screwdriver to secure the screws. 2 Slide the SSD into the box while taking care to align the connectors on the SSD with those in the box.  NOTE: • Be sure to use a Phillips No. 0 screwdriver for the lid screws and a Phillips No. 2 screwdriver for the SSD securing screws.  NOTE: • Do not insert the SSD at an angle as the connectors could be damaged. Attaching the Silicone Jacket Connectors When using the interface box as a stand-alone external device, slip it into the supplied silicone jacket to protect its connectors. SSD 3 Secure the SSD using the four supplied 3.0 mm screws. Back side Use a No. 2 Phillips screwdriver to secure the screws. 42