Panasonic AG-MSU10 Operating Instructions - Page 18

Turning the Unit on and off Use the supplied battery or AC adapter to power the unit.  For details, refer to "Connecting the Battery" (page 16).  For details, refer to "Connecting the Power Ca- ble" (page 16). Make sure that the battery or the AC adapter is properly connected to the unit. Turn the unit on before starting. And turn the unit off when you finish. Turning the unit on Hold down the POWER button for 1 second or longer to turn the unit on when it is off. The POWER LED lights green when the unit has started up. POWER LED Auto Power Off During Operation This unit will automatically power down after 10 minutes of inactivity when copying or formatting is not performed. To use the unit, turn it on again.  NOTE: • Use the steps below to set the time until auto power off is activated. Select [SETTING]  [AUTO POWER OFF] from the menu.  For details, refer to "Menu list" (page 38). • When the unit is used as a USB or eSATA device, it is not turned off automatically when inactive. Turn the unit off when it is not used. POWER button ヮユワヶ Turning the unit off Hold down the POWER button for 2 second or longer to turn the unit off when it is on. The POWER LED goes out. But the POWER LED flashes while the unit is being shut down.  NOTE: • When a low battery voltage occurs (and the battery icon is red), turn off the unit and replace the battery with a charged battery or switch to the AC adapter and turn on the unit. 18