Panasonic AG-MSU10 Operating Instructions - Page 20
Inserting and Removing a P2 Card, Inserting a P2 Card, Removing a P2 Card
View all Panasonic AG-MSU10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Inserting and Removing a P2 Card Inserting a P2 Card 1 Insert a P2 card in the P2 card slot. • Press in the card until the EJECT button pops up. ヮユワヶ EJECT button Removing a P2 Card 1 Flip up the EJECT button in the direction of the arrow. 2 Press the EJECT button. • Remove the P2 card when it pops out. • Do not remove a P2 card when the P2 card access LED (P2) is flashing. Otherwise the data may become corrupted and the P2 card could be damaged. ヮユワヶ NOTE: • Be sure to hold the P2 card level as you insert it and slide it in as far as it will go. Forcing cards into the slot at an angle may damage them. 2 Fold the EJECT button in the direction of the arrow. ヮユワヶ NOTE: • A P2 card that has just been used may be very hot and must be handled with care when removed. Preventing Accidental Deletion Set the write-protect switch to [PROTECT] to prevent accidental deletion of data recorded on a P2 card. P2 card PROTECT NOTE: • A write-protect switch setting made during copying or access will not take effect until the current read or write operation ends. 20