Panasonic CF72VCJUZQM CF72V3JUZQM User Guide - Page 13

Getting Started Create BACKUP Disks for Reinstallation When [You do not need to make "BACKUP DISK"] is displayed (procedure 5 below), there is no need to create a BACKUP DISK. If this message is not displayed, create backup disks for reinstallation. To create backup disks, the floppy disk drive and formatted 2HD floppy disks are needed. 1 Turn your computer off. 2 Set the floppy disk drive in the multimedia pocket. ( "Multimedia Pocket") 3 Turn your computer on. Log on as the administrator. Eject Button 4 Make sure a disk is not in the write-protected state and set it. 5 Windows 2000 Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the on-screen instructions. Label-side up Windows XP Insert the shutter-side Select [Start] - [All Programs] - [Panasonic] - [Create headfirst. Backup Disk] and follow the on-screen instructions. 6 Place a label identifying the contents on each disk. Names of created BACKUP DISK FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the disk by following the on-screen instructions.) CAUTION Store the floppy disks in a safe place. They will enable you to return your computer to factory default settings should any problems occur. When creating backup disks and the message [Insufficient files to copy] is dis- played, select [OK] and then contact Panasonic Technical Support. While the MP indicator ( ) is on, do not remove the floppy disk, power down your computer or enter either the standby or hibernation mode ( "Standby/ Hibernation Functions"). When creating backup disks, do not run any other application program. Be sure to create the backup disk. If a backup disk is not created, it will be impossible to return the computer to its original state. In this case, contact Panasonic Technical Support. 13