Panasonic CF72VCJUZQM CF72V3JUZQM User Guide - Page 14

Starting Up/Shutting Down Starting Up 2 1 Open the display Slide the latch as shown and lift open the display. 1 2 Turn your computer on Slide the power switch toward the rear of the computer and hold it for approximately one second until the power indicator turns on before releasing it. Power Indicator Power Switch CAUTION After confirming that the power indicator has turned on, avoid the following until Windows has completed loading. • Connecting or disconnecting the AC adaptor. • Touching the power switch. • Performing any keyboard, touch pad, touchscreen (only for models with touch- screen), or external mouse operations. • Closing the display. Once the computer is powered off, you must wait at least ten seconds before powering it on again. When the computer is turned on in a low-temperature environment, start-up may take longer than usual, in order to ensure stable operation of the computer's systems (a few minutes or more). When the CPU temperature rises, the computer may not power on to prevent the CPU from overheating. Should this happen, allow the computer to cool down then switch the power on again. If the computer still does not power on, contact Panasonic Technical Support. If security indicator ( ) is displayed, you must first enter your password ( "Security Measures") Upon entering your pass- word* and pressing Enter . If the correct password is input, Will Start Three incorrect attempts, or if no pass- word is entered for about a minute, Will Not Start (Power off) * Supervisor Password or User Password set in the Setup Utility (not the Windows password). When an application or file that was previously displayed appears on your screen, the standby or hibernation mode ( "Standby/Hibernation Functions") has been set. Operation 14