Panasonic CF72VCJUZQM CF72V3JUZQM User Guide - Page 17

Touch Pad (Basic Operation) Work Surface Use the touch pad to move the cursor on the display and perform normal computer operations. For instructions on how to operate, refer to "Touch Pad (Advanced)". NOTE The touch pad has been designed to work only when a finger is used. Therefore, do not use any implement on the touch pad. Right Button Left Button Function Moving the Cursor Tapping/Clicking Double-Tapping/ Double-Clicking Dragging Touch Pad Operation Move the tip of your finger lightly over the surface. or tapping clicking or double-tapping double-clicking or Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. While holding down the button, moving your finger on the work surface. Handling the Touch Pad If a key combination such as Fn + F5 is used while the pad is being touched, the function of the key combination may not work. In addition, it is possible that control of the cursor will be lost and the cursor will not show proper movements. In such cases, the computer has to be restarted by using the keyboard (e.g., ). Do not place any object on the work surface or press down forcefully with sharp-pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pen). Do not allow things that could dirty the touch pad, such as oil. The cursor may not work properly in such cases. When the touch pad becomes dirty: Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene, thinner, or disinfectant-type alcohol. Operation 17