Panasonic CF72VCJUZQM CF72V3JUZQM User Guide - Page 25

10 At the confirmation message , press Y . The operation of reinstallation for the hard disk starts automatically. (In the case of Windows 2000, only Product Recovery CD-ROMs 1 to 3 can be used.) CAUTION Do not cancel the reinstall procedure before it is completed. When a message appears instructing you to insert the next CD, insert the recovery CD showing the next number in the sequence, and then select [OK]. If the message “The media does not contain the correct file” appears, select [OK]. A message will appear instructing you to insert the next CD. Confirm that the proper recovery CD has been inserted by opening the tray of the CD drive and then close the tray, then select [OK]. 11 After the reinstallation procedure completes, the following message will appear on the display. Windows 2000 Windows(R) 2000 Professional install wizard will start after reboot. Restore process will execute more after Windows(R) 2000 Professional install wizard. Restart the computer after removing Product Recovery CD-ROM. Windows XP Windows(R) XP Professional install wizard will start after reboot. Restore process will execute more after Windows(R) XP Professional install wizard. Restart the computer after removing Product Recovery CD-ROM. Remove the Product Recovery CD-ROM, then restart the computer by pressing Ctrl + Alt + Del . 12 When the message [Press .2 to enter SETUP] is displayed, press F2 and then run the Setup Utility. If the password has been set, enter the Supervisor Password. 13 Press F9 . At the confirmation message, select [Yes] and then press Enter . (The Setup Utility settings will return to their default values. Even the security settings with the exception of the password(s) will return to their default values.) Change the settings where necessary. NOTE If there are added functions that are not listed in the Specifications of this Operating Instructions, we recommend disabling their device settings. If the settings are enabled, additional operations may be necessary during the Windows setup procedure. (We also recommend referring to the Supplementary Instructions, if they are included with the computer.) 14 Using either or , select [Exit] and then select [Save Current Values], then press Enter . At the confirmation message, select [Yes] and press Enter . 15 Turn the computer off, and then turn the computer on. 16 Perform the setup procedure for Windows by following the instructions on the screen. (Refer to the Supplementary Instructions, if they are in- cluded with the computer.) Windows 2000 Page 11 Windows XP page 12 17 Run the Setup Utility and change the settings where necessary. NOTE When the message [Operating System not found] is displayed, press Ctrl + Alt + Del and perform the operations from Step 12 to Step 15. If you fail to press F2 in Step 12 , restart the computer and perform the operations from Step 12 to Step 15 after finishing Windows setup procedure. Troubleshooting 25