Panasonic HVX200A Getting Started Guide - Page 1

GETTING STARTED WITH THE PANASONIC HVX200 (Irene's Quick Reference Guide) Getting Started / Shooting HD • Always start by calibrating your LCD display and / or viewfinder (use Color Bars button inside LCD flip-out; see "Video and Hi Def" reading for step-by-step instructions for calibrating your display) • Many cinematographers prefer to shoot using the viewfinder rather than the flipout screen; the black and white viewfinder display setting (change in Display Setup menu) makes it easier to see focus and to assess exposure; also, many documentary filmmakers shooting in uncontrolled situations find the flip-out screen problematic because the subject / bystanders can get distracted trying to look at what you're shooting. • If you're using the viewfinder, make sure the diopter ring is set correctly for your eyesight; if you wear glasses and prefer shooting without glasses, try calibrating the diopter for your vision (use ring on viewfinder) • Format your P2 card before starting to record - make sure footage from previous user is cleared off. • Always keep automatic / manual master switch set to manual for professionalquality recording • Shoot in 720p / 30PN format for optimized recording. 720 is the only true progressive HD resolution available in the camera, and gives about 40 minutes of recording time on a 16 GB P2 card (as opposed to only 16 min. at 1080i). 30 PN is a native progressive frame rate, meaning it only does not record any extra frames or embed the progressive frames in a standard interlaced videotape stream, so that fewer total frames are stored on the P2 card (= more recording time) and no reverse pulldown is necessary in FCP. PN frame rates are possible with P2 cards only. • If you're shooting a documentary and anticipate needing to shoot more than 40 minutes at a time, consider using the HVX to shoot miniDV instead of using the P2 cards. • Go through and set all menus before you start shooting. Load previously saved scene files and user files from SD card if applicable. • If a menu selection is blue and can't be changed, it means that you are in the wrong mode to access that particular menu function (for example you can't change variable frame rates if you are in VIDEO CAM mode). • When shooting HD, carefully control your highlights to prevent clipping / blowing out. Use a light meter, as well as the camera exposure tools (Marker and zebra stripes) to make sure your exposure is not too hot; when in doubt, err on the side of underexposing.