Panasonic KX FP145 Fax Machine - Page 34
Sending a fax using the navigator directory, 4.4 Broadcast transmission - fax in memory
UPC - 037988809653
View all Panasonic KX FP145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. Fax 4.3 Sending a fax using the navigator directory Before using this feature, program the desired names and telephone numbers into the navigator directory (page 25). L Keep the front cover page open for button locations. 1 Adjust the width of the document guides to fit the actual size of the document. 2 Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document. L If the document guides are not adjusted to fit the document, re-adjust them. 3 If necessary, press {A} or {B} repeatedly to select the desired resolution (page 30). 4 Press {>}. 5 Press {A} or {B} repeatedly to display the desired item and press {FAX/START}. Fax auto redial If the line is busy or if there is no answer, the unit will automatically redial the number. L To cancel redialing, press {STOP}. If your unit does not send a fax L Confirm that you have entered the number correctly, and that the number is a fax number. L Confirm that the other party's fax machine is answering by turning on the connecting tone feature (feature #76, page 54). 32 4.4 Broadcast transmission By programming items from the navigator directory (page 25) into the broadcast memory, you can send the same document to multiple parties (up to 20). Your programmed items will remain in the broadcast memory, allowing frequent re-use. See page 33 for broadcast transmission instructions. L Keep the front cover page open for button locations. 4.4.1 Programming items into the broadcast memory 1 Press {MENU} repeatedly to display "DIRECTORY SET". 2 Press {#}. L The number in brackets indicates the number of registered items. 3 Press {A} or {B} repeatedly to display the desired item. 4 Press {SET}. L To program other items, repeat steps 3 and 4 (up to 20 items). 5 Press {SET}. Note: L If you program the wrong item, press {STOP} after step 4 to erase the item. L Confirm the stored items by printing a broadcast programming list (page 72). 4.4.2 Adding a new item into the broadcast memory After initial programming, you can add new items (up to a combined total of 20). 1 Press {>}. 2 Press {A} or {B} repeatedly to display "". 3 Press {MENU}. 4 Press {*}. 5 Press {A} or {B} repeatedly to display the desired item you want to add. 6 Press {SET}. L To add other items, repeat steps 5 and 6 (up to 20 items). 7 Press {STOP}.