Panasonic KX FP145 Fax Machine - Page 53
Basic features, Programmable Features
UPC - 037988809653
View all Panasonic KX FP145 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
8.2 Basic features Code #00: Setting the Quick Setup QUICK SETUP PRESS SET See page 15 for details. Code #01: Setting the date and time SET DATE & TIME PRESS SET See page 21 for details. Code #02: Setting your logo YOUR LOGO PRESS SET See page 22 for details. Code #03: Setting your fax number YOUR FAX NO. PRESS SET See page 23 for details. Code #04: Printing a sending report SENDING REPORT MODE=ERROR [±] To print a sending report for fax transmission results (page 31). "ERROR" (default): A sending report will be printed only when fax transmission fails. "ON": A sending report will be printed out after every transmission. "OFF": Sending reports will not be printed out. Code #06: Changing the ring setting in TAM/FAX mode (Telephone Answering Machine/Fax mode) TAM RING COUNT RINGS=2 [±] To change the number of rings before the unit answers a call in TAM/FAX mode. You can select "1", "2" (default), "3", "4", "TOLL SAVER" or "RINGER OFF". See page 35 for details. Note: L Set feature #77 to "TAM/FAX" (page 54) beforehand. Code #06: Changing the ring setting in FAX ONLY mode FAX RING COUNT RINGS=3 [±] 8. Programmable Features To change the number of rings before the unit answers a call in FAX ONLY mode. You can select "1", "2", "3" (default) or "4". Note: L Set feature #77 to "FAX ONLY" (page 54) beforehand. Code #10: Changing the maximum incoming message recording time RECORDING TIME MODE=VOX [±] "VOX" (default): Unlimited. "1 MIN": Up to 1 minute. Code #11: Setting the remote operation ID REMOTE TAM ID ID=111 1. Press {MENU}. 2. Press {#}, then {1}{1}. 3. Enter any 3-digit number except a number using 0 or 7. L The default ID is "111". 4. Press {SET}. 5. Press {MENU}. Code #13: Setting the dialing mode DIALING MODE MODE=TONE [±] If you cannot dial, change this setting depending on your telephone line service. "TONE" (default): For tone dial service. "PULSE": For rotary pulse dial service. Code #17: Setting the ringer pattern RINGER PATTERN MODE=A [±] You can select "A" (default), "B" or "C". 51