Panasonic KX-THA16 Telephone Equipments - Page 61

Useful Information Error messages/icons Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Busy Camera detect Denied Turn access on at device. Error!! Error!! 8 handsets have already been registered. Failed Cause & solution L The called handset or base unit is in use. L Other users are using the line(s). Wait until the line button light or the line status icon goes out. L Privacy mode is on for the call you tried to join (page 34). L The handset or base unit you tried to copy phonebook items to is in use. L The handset you are calling is too far from the base unit. L The handset user is monitoring a room using the cordless camera. L The cordless camera paged the unit, but nobody answered the page. After you monitor the cordless camera, it disappears from the display. L The monitor feature is turned off on the destination handset or base unit and the room cannot be monitored (page 35). L The unit's registration or deregistration has failed. Move this unit and the base unit away from the electrical appliances and try again. L The handset or base unit user tried to send phonebook items to you but there was an error. Have the other user re-send the items to you (page 24). L 8 handsets have already been registered to the base unit. The deregistered handset number is still retained in the base unit. To register an additional handset, erase the unnecessary handset number using the base unit. For more information, see the operating instructions included with your base unit. L Video phone feature is not permitted on the other party's unit. L The video connection failed and you will be returned to voice call shortly. Wait until it returns to voice call. L If the "PC camera access" setting on the base unit is set to "On", you cannot use the video phone feature during an intercom call. For assistance, please visit http://www.panasonic.com/phonehelp 61