Panasonic KX-THA16 Telephone Equipments - Page 66

Useful Information Making/answering calls, intercom Problem Static is heard, sound cuts in and out. Interference from other electrical units. The unit does not ring. I cannot make a call. I cannot redial by pressing {REDIAL}. I cannot have a conversation using the headset. I cannot make long distance calls. I cannot page the handset or base unit. I cannot turn the clarity booster feature on. The interrupt tones sound while I am on an outside call or on an intercom call or monitoring a room. Cause & solution L Move this unit and the base unit away from other electrical appliances (microwave, wireless LAN appliances, etc.). L Move closer to the base unit. L Raise the base unit antennas. L Turn on the clarity booster feature (page 20). L The ringer volume is turned off. Adjust it (page 42, 55). L When printing (page 59), the unit does not ring until "Please wait" disappears from the display. To answer a call, press {s}. The unit stops printing. L The dialing mode may be set incorrectly. Change the setting (page 49). L The base unit (including answering system) or handset is in use. Try again later. L If the last number dialed was more than 48 digits long, the number will not be redialed correctly. Dial the number manually. L Make sure that a Panasonic optional headset is connected properly (page 12). L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called unit is in use. Try again later. L The resources available for wireless communication (making or answering calls with a handset, monitoring camera images from a computer, etc.) are limited. Wait for the other user to end the operation and try again. L A call is being received. Press {OFF} to end the call or stop monitoring, then answer the call. 66 For assistance, please visit http://www.panasonic.com/phonehelp