Panasonic KXTG5243 5.8ghz Cdl Multi H/s - Page 22
Initial setting, LCD contrast, Programmable Settings
View all Panasonic KXTG5243 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Programmable Settings Base unit ringer tone (use either the handset or the base unit) Base Unit Make sure the base unit is not being used. 1 Press [H] or [G]. • The base unit will ring using the current ringer tone. If the ringer volume has been turned off, the base unit will not ring (p. 21). 2 Press [H] or [G] repeatedly to select the desired tone. • Each time you press [H] or [G], another ringer tone will be heard and selected. • To stop ringing, press [STOP]. • You can also select the ringer tone by pressing [1] to [7]. [1] to [3]: Bell ringer patterns [4] to [7]: Melody patterns Selecting the base unit ringer tone by using the Handset 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). 3 Scroll to "Set base unit" by pressing [d] or [B], then press the soft key ( SELECT ). 4 Press the soft key ( SELECT ) at "Ringer tone". 5 Follow steps 4 and 5 of "Handset ringer tone" on page 21. • When selecting the ringer tone, the base unit will ring. If the base unit ringer volume has been turned off (p. 21), the base unit will not ring. LCD Contrast Handset There are 6 levels of LCD contrast. The factory preset is "level 3". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting LCD contrast 3 Scroll to "LCD contrast" by pressing [d] or [B], then press the soft key ( SELECT ). 4 Select the desired contrast by pressing [d] or [B]. • The contrast will change. • The number of steps indicates the contrast level. 5 Press the soft key ( SAVE ), then press [OFF]. Ex. Level 3 LCD contrast Low High 22