Panasonic KXTG5243 5.8ghz Cdl Multi H/s - Page 24

Preparing the Answering System To review the greeting Press [GREETING CHECK]. To adjust the speaker volume, press [d] or [B] during playback. • 9 levels (0-8) are available while using the Answering System. The level is displayed on the base unit. To erase the greeting Press [GREETING CHECK], then press [ERASE] while the recorded message is being played. • The unit will answer calls with a pre-recorded greeting (see below). Pre-recorded greeting If you do not record a greeting (p. 23), one of two greetings will be played when a call is received, depending on the caller's recording time (see below). To review the pre-recorded greeting, press [GREETING CHECK]. • A pre-recorded greeting will be played as follows: N When the recording time is set to "1 minute", "2 minutes" or "3 minutes": "Hello, we are not available now. Please leave your name and phone number after the beep. We will return your call." • If recording time runs out, the unit will automatically switch to the "Greeting only" mode (see below), and no new messages will be recorded. N When the recording time is set to "Greeting only": "Hello, we are not available now. Please call again. Thank you for your call." Flash Memory Message Backup (Message storage) Messages stored in memory will not be affected by power failures. All messages are saved until you erase them. Caller's Recording Time Handset You can select "1 minute", "2 minutes", "3 minutes" or "Greeting only" for the caller's recording time. The factory preset is "3 minutes". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting 3 Press the soft key ( SELECT ) at "Set answering". Set answering 24