Panasonic KXTG5243 5.8ghz Cdl Multi H/s - Page 30

Making Calls Using the Base Unit Base Unit 1 Press [SP-PHONE]. • The indicator lights. 2 Dial a phone number. • If you misdial, press [SP-PHONE] and start again from step 1. [REDIAL/PAUSE] [B], [d] 3 When the other party answers, talk into the MIC (microphone). 4 To hang up, press [SP-PHONE]. • The indicator light goes out. [HOLD] MIC [SP-PHONE] and Indicator IN USE Indicator • To switch to the handset while using the base unit speakerphone: - If the handset is off the base unit, press [C] or [s] on the handset, then press [SP-PHONE] on the base unit. - If the handset is on the base unit, just lift up. Hands-free Digital Duplex Speakerphone For best performance, please note the following: • Talk alternately with the other party in a quiet room. • If you or the other party has difficulty hearing, press [d] to decrease the speaker volume. To adjust the speaker volume during a conversation To increase volume, press [B]. To decrease volume, press [d]. • There are 8 volume levels. If you try to increase/decrease volume when it is at the maximum/minimum level, the base unit beeps 3 times. The level is displayed on the base unit. To redial the last number dialed Press [SP-PHONE], then press [REDIAL/PAUSE]. To put a call on hold Press [HOLD] during a conversation. • The SP-PHONE indicator and IN USE indicator flash. To return to the call, press [SP-PHONE]. • The handset users can also take the call by pressing [C] or [s]. • If another phone is connected on the same line (p. 12), you can also take the call by lifting its handset. • If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold the call will be disconnected. 30