Panasonic KXTG5243 5.8ghz Cdl Multi H/s - Page 85
Problem, Cause & Remedy, For assistance, please call: 1-800-211-PANA7262, SP-PHONE], REDIAL/PAUSE]
View all Panasonic KXTG5243 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Preparation Telephone System Answering System Useful Information Troubleshooting Problem While programming or searching, the handset or base unit starts to ring and the program/search stops. You cannot make an intercom/ outside call. You cannot redial. You cannot make long distance calls. The handset does not display the caller's name and/or phone number. Cause & Remedy • A call is coming in. To answer the call, press [C], [s] or [SP-PHONE]. Start again from the beginning after hanging up. • If more than one other user is using the handset and/or base unit, you may not be able to make a call. Try again later. • Your handset is in remote operation mode (p. 65). Exit by pressing [OFF]. • The handset you called is too far from the base unit. • If the last number dialed was more than 48 digits long, the number will not be redialed correctly. • The [REDIAL/PAUSE] button on the base unit functions as either redial or pause. It will redial the last number dialed if pressed before dialing any digits (p. 30). If another number has been dialed first, it will operate as a pause button (p. 56). • Please make sure you have long distance service. • Check if Caller IQ feature is turned on. Turn Caller IQ feature off (p. 90). • You need to subscribe to Caller ID. • Other telephone equipment may be interfering with your phone. Disconnect it and try again. • Other electrical appliances connected to the same outlet may be interfering with Caller ID. • Telephone line noise may be affecting Caller ID. • The caller requested not to send his/her Caller ID information (p. 32). • If a call is being transferred to you, the Caller ID information will not be displayed. • If a (separate) Caller ID box is connected between the base unit and the telephone wall jack, disconnect the Caller ID box or plug the unit directly into the wall jack. • If the unit is connected to a telephone line with DSL service, the unit may not display caller's name and/or phone number properly. We recommend connecting a noise filter (contact your DSL service provider) to the telephone line between the unit and the telephone line jack. For assistance, please call: 1-800-211-PANA(7262) 85