Panasonic KXTG5583 KXTG5583 User Guide - Page 45
Programming Via Direct Commands
View all Panasonic KXTG5583 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Programmable Settings Programming via direct commands You can also program features using "direct commands"-special codes that take you directly to the feature you wish to program and allow you to select the desired setting. There is no need to scroll through the unit's menus. Details of each feature can be found on the corresponding pages. Important: L Before programming, make sure the handset and base unit are not being used. The handset must be operated near the base unit and while off the base unit or charger. 1 Press {MENU} (middle soft key), then press {#}. :Enter direct No. 2 Enter the desired feature code (shown below). 3 Enter the desired setting code (shown below). L This step may vary depending on the feature being programmed. 4 Press {SAVE}. 5 Press {OFF} to exit programming mode. Note: L If the handset beeps 3 times, you entered an invalid code. Enter the correct code. L If you make a mistake or enter the wrong code, press {OFF} then start again by pressing {MENU}. Direct commands chart Important: L The default settings are indicated by *. Feature Date and time Change language Set dial mode Set flash time Set line mode HS registration Feature code {1} {0} {1} {1} {1} {0} {1} {2} {0} {1} {2} {1} {1} {2} {2} {1} {3} {0} Setting code Enter date and time. (Default: 12.31.2005) {1}: English* {2}: Spanish {1}: Pulse {2}: Tone* {1}: 700 ms* {2}: 600 ms {3}: 400 ms {4}: 300 ms {5}: 250 ms {6}: 110 ms {7}: 100 ms {8}: 90 ms {1}: A {2}: B* Go to step 5 on page 56. Page 20 53 20 53 54 56 For assistance, please visit http://www.panasonic.com/consumersupport 45