Panasonic KXTG6641 KXTG6632 User Guide - Page 53

Useful Information, Battery recharge, Problem, Cause/solution, Making/answering calls, intercom

Page 53 highlights

Useful Information Battery recharge Problem Cause/solution The handset beeps and/or R Battery charge is low. Fully charge the batteries flashes. (page 9). I fully charged the batteries, but - still flashes, - is displayed, or - the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 9). Making/answering calls, intercom Problem Cause/solution is displayed. R The handset is too far from the base unit. Move closer. R The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 33). Noise is heard, sound cuts in and out. R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ ADSL provider for details. The handset does not ring. R The ringer volume is turned off. Adjust the ringer volume (page 17). R Silent mode is turned on. Turn it off (page 31). The base unit does not ring. R The ringer volume is turned off. Adjust the ringer volume (page 17). I cannot make a call. R The dialing mode may be set incorrectly. Change the setting (page 14). R The handset is too far from the base unit. Move closer and try again. I cannot make long distance calls. R Make sure that you have long distance service. For assistance, please visit http://www.panasonic.com/help 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R
Battery charge is low. Fully charge the batteries
(page 9).
I fully charged the batteries,
but
still flashes,
is displayed, or
the operating time
seems to be shorter.
R
Clean the battery ends (
,
) and the charge
contacts with a dry cloth and charge again.
R
It is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the base unit. Move
closer.
R
The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
R
The handset is not registered to the base unit.
Register it (page 33).
Noise is heard, sound cuts
in and out.
R
You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
R
Move closer to the base unit.
R
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
The handset does not ring.
R
The ringer volume is turned off. Adjust the ringer
volume (page 17).
R
Silent mode is turned on. Turn it off (page 31).
The base unit does not ring.
R
The ringer volume is turned off. Adjust the ringer
volume (page 17).
I cannot make a call.
R
The dialing mode may be set incorrectly. Change
the setting (page 14).
R
The handset is too far from the base unit. Move
closer and try again.
I cannot make long
distance calls.
R
Make sure that you have long distance service.
For assistance, please visit http://www.panasonic.com/help
53
Useful Information