Panasonic KXTG9392 Dect Telephone - Page 47
Error messages, Useful Information
View all Panasonic KXTG9392 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Useful Information Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Busy Check tel line 1 Check tel line 2 Error!! Failed Incomplete Memory full Messages full No link to base. Reconnect AC adaptor. Use rechargeable battery. You must first subscribe to Caller ID. Cause/solution L The called handset or base unit is in use. L Other units are in use and the system is busy. Try again later. L Privacy mode is on for the call you tried to join (page 21). L The handset you are using is too far from the base unit. Move closer and try again. L The handset's registration may have been canceled. Re-register the handset (page 32). L The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 13). L If you use the unit as a single-line telephone only, erase the message as follows: To erase "Check tel line 1", press {MENU}. i {#}{1}{8}{9} To erase "Check tel line 2", press {MENU}. i {#}{1}{9}{0} When a power failure occurs, the message is displayed again. Erase again as above. L The handset's registration has failed. Move the base unit and handset away from all electrical appliances and try again. L Recording was too short. Try again. L Phonebook copy failed (page 24). Confirm the other unit (the receiver) is in standby mode and try again. L Phonebook copy is incomplete. The receiver's phonebook memory is full. Erase the unnecessary phonebook entries (page 23) from the other unit (the receiver) and try again. L The phonebook memory is full. Erase unnecessary entries (page 23). L Message memory is full. Erase unnecessary messages (page 37, 38). L Message memory is full. Erase unnecessary messages (page 37, 38). L The handset has lost communication with the base unit. Move closer to the base unit and try again. L Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handset's registration may have been canceled. Re-register the handset (page 32). L A wrong type of batteries such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 15. L You must subscribe to Caller ID service. Once you receive caller information after subscribing to Caller ID service, this message will not be displayed. For assistance, please visit http://www.panasonic.com/help 47