Panasonic SA-XR57K Receiver - Page 35

Preset tuning Before use Presetting stations n Auto presetting n Manual presetting 1 Set the channel reception to FM 87.9 MHz or 1 Tune to the station you want to preset. AM 530 kHz. (ápage 34) (ápage 34) Preset channels that are automatically assigned by this unit are: FM: 1 to 30 AM: 21 to 30 Preset the FM stations first. If the AM stations are preset before the FM stations, they will be erased when the FM stations are preset. 2 Enter the menu. 2 Enter the menu. MENU Press SETUP RETURN 3 Select "TUNER " and confirm the setting. MENU Press SETUP RETURN 3 Select "TUNER " and confirm the setting. 4 Select "MEMORY " and confirm the setting. 5 Select a channel number and press [ENTER]. "STORED " is displayed. • To continue presetting, press [TUNE 2 or 1] to tune 4 Select "AUTO MEMO " and confirm the setting. 5 Select "START " and press [ENTER]. another station from step 1. 6 Press [-MENU, -SETUP, RETURN] 2 times to Select "CANCEL " to cancel. select "EXIT " and press [ENTER]. • During automatic presetting, the memory indicator ( M ) flashes • FM stations can also be preset in the MONO mode and the frequency scrolls. The memory indicator and channel (á below). numbers are displayed for a second when a station is preset. • The last station to be preset is displayed when presetting finishes. • Frequencies may not be preset correctly when broadcast waves are too strong or too weak. In such cases, carry out presetting manually. • Even if the AC power supply cord is disconnected from the household AC outlet, the stations remain in the memory for approximately two weeks. Listening to preset stations n On the remote control • Select the channel. CH • Press the numbered buttons to select the channel. 0 ENTER To select a two digit number e.g. 21: [ ≧ 10, ENTER] → [2] → [1] n On the main unit 1 Enter the menu. MENU Press SETUP RETURN 2 Select "TUNER " and confirm the setting. 3 Select "TUNE MODE " and confirm the setting. 4 Select "PRESET " and confirm the setting. 5 Press [-MENU, -SETUP, RETURN] 2 times to select "EXIT " and press [ENTER]. 6 Select the channel. TUNE Press • Hold down the button to change channels faster. Select "MANUAL " in step 4 when you wish to perform manual tuning (á page 34). Operations The radio Reducing excessive noise (on the main unit) Select if noise is excessive during radio reception. n During FM stereo reception You can improve FM reception by switching reception to monaural. 1 Select "TUNER " and confirm the setting. 2 Select "FM MODE " and confirm the setting. 3 Select "MONO " and confirm the setting. • When this is set, "MONO" appears on the display. • Select "AUTO " to cancel. 4 Press [-MENU, -SETUP, RETURN] 2 times to select "EXIT " and press [ENTER]. Preparation: Press [-MENU, -SETUP, RETURN] to enter the menu. n During AM reception When there is a lot of noise interference with an AM broadcast, try switching to this mode. 1 Select "TUNER " and confirm the setting. 2 Select "BEAT PROOF " and confirm the setting. 3 Select "MODE 1 " or "MODE 2 " and confirm the setting. 4 Press [-MENU, -SETUP, RETURN] 2 times to select "EXIT " and press [ENTER]. 35 RQT8549