Panasonic SAXR700 SAXR700 User Guide - Page 13

Quick guide Watch DVDs or TV/Control with HDMI (Ez Sync™ HDAVI Control) Control with HDMI (Ez Sync™ HDAVI Control) What is Ez Sync HDAVI Control? Ez Sync HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD recorder (DIGA) under Ez Sync HDAVI Control. You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. 1 Connect the unit to a Panasonic TV (VIERA) and DVD recorder (DIGA) under Ez Sync HDAVI Control using the HDMI cable. (It is recommended that you use Panasonic's HDMI cable. NonHDMI-compliant cables cannot be utilized.) 2 Make settings in the menu for the TV (VIERA) to activate linked Ez Sync HDAVI Control operations. 3 Perform the following steps to make sure the unit accurately identifies connected equipment. 1) Turn all equipment on. 2) Switch the TV (VIERA) off and then put it back on. 3) Switch the unit's input to "DVR " and make sure the TV (VIERA) correctly shows pictures. (Take these steps after changing connections or settings.) . DIGITAL AUDIO OUT (OPTICAL) HDMI (AV IN) TV (VIERA) GND LOOP EXT LOOP ANT GND FM ANT DIGITAL IN AM ANT Rear panel OUT (BD/DVD PLAYER) IN (DVD RECORDER) IN S VIDEO VIDEO (BD/ (TV/STB) (DVD RECODER) DVD PLAYER) ïCDð OPTICAL1 OPTICAL2 COAXIAL1 COAXIAL2 OUT BD/ IN IN IN OUT BD/ IN IN IN TV MONITOR DVD PLAYER DVD RECORDER TV/STB TV MONITOR DVD PLAYER DVD RECORDER VCR CENTER DVD recorder (DIGA) HDMI (AV OUT) You need an optical fiber cable for enjoying TV with surround sound. DIRECT NAVITGOAPTOMRENU CH 0 DIRECT TUNING DISC XM CAT ENTER VOLUME XM CH SKIP SLOW/SEARCH STOP PAUSE PLAY DRIVE SELECT CM SKIP ONE TOUCH PLAY ENTER FUNCTIONS Enjoying the Home Theater through one-touch operations Aim the remote control at the DVD recorder (DIGA) and press ONETOUCH PLAY The following operations are automatically performed when you just press [ONE TOUCH PLAY]. 1 The DVD recorder goes on and starts playing back the recorded media in the selected drive (e.g. HDD, DVD). 2 The TV goes on and the TV input changes. 3 Surround playback starts after the unit is turned on and the input source for the unit switches to "DVR ". VOLUME To adjust the volume: Press You can also adjust the volume on your TV (VIERA)'s remote control. (A message informing the action appears on your TV while you adjust the volume.) • Press [u SKIP] to start playing a DVD disc or a recorded TV program again when playback does not start from the beginning. Note • Only this unit turns off when you shut it down. Other connected equipment compatible with Ez Sync HDAVI Control stay on. • Audio output automatically switches to speakers on your TV (VIERA) when you turn the unit off. Audio output from the DVD recorder (DIGA) switches from speakers on the TV (VIERA) to speakers connected to the unit when you turn the unit on. • This unit goes from off to on, and speakers connected to this unit start making audio output when you set the TV (VIERA) to output sounds from the unit. • This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input source as "TUNER " or "CD " on this unit.) • The input for the unit switches automatically to "DVR " when a source is played back on the DVD recorder. • When pictures arrive after sounds, select "ON " in "Adjusting audio timing to video timing" (á page 38). • To set the unit against Ez Sync HDAVI Control, see page 37. • The remote control supplied with the TV (VIERA) may not work on the equipment connected to the BD/DVD player terminal when you connect Ez Sync HDAVI Control compatible equipment to both of the unit's two HDMI input terminals. Enjoying sounds from the TV The input source for the unit switches to "TV/STB " when you select a TV channel or operate the TV in other ways (á page 45). 13 RQT8739