Panasonic SVAV50 Sd Movie - Page 41

Using Auto Recording Function When the input signal is detected, the recording starts automatically. 4 1 Connect the SD Video Camera with the external device. (l 40) ≥Always use the AC adaptor. This function does not work with the battery alone. 5 2 Set up the external device such as timer setting. 3 Confirm that the image or sound signal is not output. 4 Set the Record/Play mode Switch to [ ] and set the operation mode to [MPEG4]. 5 Press the [MENU] Button and then, select [Auto recording setup] and press the Jog Ball. 6 Set [REC Timer] to desired time. ≥The setting time is the period between starting 6 recording and finishing recording. 7 Select [Auto record standby] and press the Jog Ball. ≥A verification message appears. 7 8 Select [Yes] and press the Jog Ball. ≥Transits to the standby mode and the power is automatically shut down. ≥When the input signal is detected, the recording starts. ≥Pressing the Recording Start/Stop button during recording will stop the recording. 8 MODE Ô MENU × 4'%/'07 /2')OQFG #WVQTGEQTFKPIUGVWR ų &KURNC[UGVWR 5GVWR 5WRGTHKPG ':+6 #7614'%14&+0)5'672 4'%6KOGT OKP #WVQTGEQTFUVCPFD[ ų Ô × #7614'%14&+0)5'672 4'%6KOGT OKP #WVQTGEQTFUVCPFD[ ų Ô × 41