Pantech Link II Manual - English and Spanish - Page 107

In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the 01 M3 level rating, the sum of the two values equal M5. This is synonymous for T ratings. This should provide the hearing aid user with "normal usage" while using their hearing aid with the particular 02 wireless phone. "Normal usage" in this context is defined as a signal quality that is acceptable for normal operation. 03 The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for 04 Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the 05 American National Standards Institute (ANSI) C63.19 standard. 06 To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and WLAN components must be disabled during a call. 07 See page 84 for instructions to disable these components. This phone has been tested and rated for use with hearing aids for some of the wireless 08 technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider about its return and exchange policies and for information on hearing aid compatibility. 107