Pentax ZX-7 ZX-7 Manual
Pentax ZX-7 - Date AF SLR Camera Manual
 |
UPC - 027075047167
View all Pentax ZX-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pentax ZX-7 manual content summary:
- Pentax ZX-7 | ZX-7 Manual - Page 1
PENTAX ZX-7 OPERATING MANUAL ' 411117111111 \IMMMM IM \O=MIEMMI - `4111MMEMMIh. AMN IUMMUP, 4141111Mm_ - Pentax ZX-7 | ZX-7 Manual - Page 2
manual Operation direction -41..•• Automatic operation Attention Lamp blinking Correct Incorrect 01 . 147- 0 X Lenses and accessories produced by other manufacturers are not made to our precise specifications and therefore may cause difficulties with, or actual damage to, your Pentax camera - Pentax ZX-7 | ZX-7 Manual - Page 3
particularly careful with the flash around infants. • Never try to disassemble, short or recharge the battery. Also, do not dispose of the battery in fire, as it may explode. • Remove the batteries from the camera immediately if they become hot or begin to smoke. Be careful not burn yourself during - Pentax ZX-7 | ZX-7 Manual - Page 4
water, dirt or dust at points of electrical contact. Also check for battery leakage, traces of dirt or grease, or corrosion due to salinity or gas. If you cannot correct the problems, have your camera inspected at a Pentax service center. Repairs of this nature are not covered under the terms of the - Pentax ZX-7 | ZX-7 Manual - Page 5
as outlined in the "Precautions for Your Camera" section or any other operation contrary to the instructions outlined in this manual, charges will be assessed and a repair quotation will be pro- vided. PRECAUTION FOR BATTERY USEGE CNN • Use two 3V lithium batteries (CR2 type). • Misuse of the - Pentax ZX-7 | ZX-7 Manual - Page 6
) ....11-23 Attaching the camera strap 11 Loading the batteries 12 • When the battery is exhausted 13 Attaching the lens 14 Turning on the power 16 Operating the shutter release button 16 Using the data back 17 Film loading 18 Unloading film 21 • Rewinding a film in mid-roll 22 - Pentax ZX-7 | ZX-7 Manual - Page 7
Retractable Flash (RTF) 67 • Compatibility of F and FA lenses with the built- in flash 69 Setting the film speed (ISO) manually 70 Adjusting the Data Back 71 Installing the battery in the Data Back 73 Using a Pentax Dedicated External Flash 74 • Contrast-Control-Sync Flash Photography - Pentax ZX-7 | ZX-7 Manual - Page 8
lug (p.11) 6 Release socket 6 Back cover release lever (p.18) (ID Exposure compensation button (p.62) 6 Mid-roll rewind button (p.22) lit) Focus mode switch (p.28, 65) • Mirror 4)+• AF coupler Lens information contacts a Lens lock button (p.14) a Lens mount index - Pentax ZX-7 | ZX-7 Manual - Page 9
adjustment lever (p.23) Panorama lever (p.44) Memory lock button (p.63) Film information window 00 Pressure plate Back cover (p.18) Film leader end mark (p.19) Battery cover chamber screw (p.12) Battery chamber cover (p.12) Sprocket (p.19) Tripod socket DX-information (p.19) GIN - Pentax ZX-7 | ZX-7 Manual - Page 10
information (p.25, 36) : Red-eye reduction flash indication (p.32) COBB : Automatic flash information (p.25) ISO : Manual-set film speed (p.70) Tv 8860: Shutter speed a : Battery exhaustion warning (p.13) ▪ Remote control release with a 3-sec. delay (p.40) ■11) : Audible PCV signal (p.62 - Pentax ZX-7 | ZX-7 Manual - Page 11
six segments within the image field, enabling an optional exposure to be made under a variety of lighting conditions. With multi(6)-segment metering, the camera records the brightness in six zones within the image field and will properly expose the subject. The multi (6)-segment metering system also - Pentax ZX-7 | ZX-7 Manual - Page 12
MID CAMERA FUNCTIONS AVAILABLE WITH VARIOUS LENSES [Function Lens • [Mount type] --A-utofocus (Lens only) (Lens with AF Adapter 1.7X) 3-point autofocus Manual focus (with FI) (with Matte field) Power zoom Image size tracking Zoom clip Auto zoom effect Picture Mode Auto Picture Mode - Pentax ZX-7 | ZX-7 Manual - Page 13
I. BASIC OPERATION (PREPARATION) ATTACHING THE CAMERA STRAP IBM 0 Co C) 0 z rn 33 Nc 0 z Fit the strap on the camera as illustrated. 33 m • There is a pocket on the strap so you can store the remote control transmitter, finder cap, 33 release socket cover, hot shoe - Pentax ZX-7 | ZX-7 Manual - Page 14
of the built-in flash will be re-set. • The optional "AA-Battery Pack FG" is also available for this camera instead of using the lithium batteries. • Replace two batteries at the same time. Do not mix battery brands, type or an old battery with a new one. It may cause explosion or overheating. - Pentax ZX-7 | ZX-7 Manual - Page 15
24-exposure film rolls at -10°C/14°F) General existing light photography Flash photography (using flash 50% of the times) Flash photography (using flash 100% of the times) Bulb exposure time about 30 rolls about 15 rolls about 5 rolls about 2 hours CR2 batteries were used under Pentax testing - Pentax ZX-7 | ZX-7 Manual - Page 16
storage, the optional accessory "Body Mount Cap K" is available. 2. Align the red dots on the camera and lens mount, attach the lens to the camera body, and turn it fully to the right until you hear a click. • Ensure that the camera's main switch is in the [OFF] position before attaching an FA zoom - Pentax ZX-7 | ZX-7 Manual - Page 17
direction of the arrow. • We assume no responsibility nor liability for damages resulting from the use of lenses made by other manufacturers. • The camera body and lens mount incorporate lens information contacts and an AF coupler. dirt, dust, or corrosion may cause damage to the electrical system - Pentax ZX-7 | ZX-7 Manual - Page 18
To cancel this function, set the mode dial to [no)] and reinstall the battery. To light up the mode dial again, the same procedure as cancellation is gently to prevent camera shake. • To prevent camera shake, depress the shutter release button gently. • Before loading a roll of film, slowly depress - Pentax ZX-7 | ZX-7 Manual - Page 19
camera as the Date version, read this section. The DATE model records data information on your photographs clearly on each frame that you expose. At each press of the DATE 72. • The data back operates on a 3V lithium battery. If the data imprinted on the picture or the data displayed on the LCD - Pentax ZX-7 | ZX-7 Manual - Page 20
with ISO ratings from 25 to 5000. • When DX-coded film is used, the correct film speed is automatically set for the camera. If you use a non-DX coded film, you can set the film speed manually. See page 70. • Before loading film for the first time after purchase, open the back cover and remove the - Pentax ZX-7 | ZX-7 Manual - Page 21
reach the take -up spool. THE SHUTTER CURTAINS ARE FINE-PRECISION MATERIAL. DO NOT TOUCH THEM WITH YOUR FINGERS OR ANY OTHER OBJECT WHILE LOADING FILM. • If you have pulled out too much film, push it back into the cartridge to reduce the slack. • The DX information pins in the - Pentax ZX-7 | ZX-7 Manual - Page 22
is not loaded ( properly, [ a_ E] on the LCD panel blinks, indicating E Pail@ No- A / 16 that the film is not loaded properly. Open the back cover and load the film once again. \.\ ...,_ O OFF ON M.B0) •e0, ci_Jr, 7.-. ,.....gi . c 5. Close the back cover and set the main switch to ON. 6. The - Pentax ZX-7 | ZX-7 Manual - Page 23
rewound, the exposure counter counts frame numbers in reverse. • Never open the back cover until the whole film roll is completely rewound. • When removing the film from the camera, protect it from exposure to direct sun light. 2. When the film is fully rewound, only [0] blinks on the LCD panel. - Pentax ZX-7 | ZX-7 Manual - Page 24
frames may be lost in processing. When you take important pictures, rewind the film when the film reaches the number of frames indicated on the film cartridge. " Rewinding a film in mid-roll If you wish to unload the film before exposing all the frames, use this function. Set the main switch to - Pentax ZX-7 | ZX-7 Manual - Page 25
ADJUSTING THE VIEWFINDER DIOPTER Mill (0) 0 Alm the camera at a bright subject.While looking through the viewfinder,move the diopter adjustment lever to the left or right until the autofocus frame [C 3] appears in the - Pentax ZX-7 | ZX-7 Manual - Page 26
pictures by simply depressing the shutter release button. In this mode, the camera automatically selects one of 5 picture modes according to the requirement of the Mode operates only when an FA or F lens is attached. The Green Operation Mode operates only with an A-lens attached. • See page 54 to 60 - Pentax ZX-7 | ZX-7 Manual - Page 27
USING SMART FLASH MODE Cal Q\ a II BASIC OPERATION (SHOOTING) OFF ON 1 :, o Tv 125-I ") Av 2 2 Auto-popup flash function 1. Depress the flash mode button until [M] appears on the LCD panel. The auto-popup flash function operates only When the Auto Picture Modes or Picture Mode is set. • - Pentax ZX-7 | ZX-7 Manual - Page 28
LCD panel. OFF ON Tv ;25" min Av2 2 • From among 5 modes, the camera selects the best one depending on the size of the subject and some other factors. The flash , the external flash will not discharge either. • When the lens aperture ring is set to other than [ A ] with the mode dial set to - Pentax ZX-7 | ZX-7 Manual - Page 29
USING ZOOM LENSES (DNIIOOHS) NOLLVEI3dO 3ISVEI Telephoto t Wide angle Turning the zoom Zoom Clip Mode, Auto Zoom Effect Mode and Power Zoom function do not operate with this camera even if an FA power zoom lens is attached. • The smaller the number shown in the zoom scale window, the wider the - Pentax ZX-7 | ZX-7 Manual - Page 30
available function. SELECTINTGHEAUTOFOCUMSODE 74, BAR I For autofocus operation, set the focus mode switch to [AF]. When you depress the shutter release button halfway down, the lens automatically focuses. Set the focus mode switch to [ AF ]. • See page 64 for - Pentax ZX-7 | ZX-7 Manual - Page 31
held vertically O For best results, be sure to hold the camera correctly as shown in the illustrations. Hold the camera firmly, with your left hand supporting the camera and lens as shown in the illustrations. While taking a picture, hold your breath and gently depress the shutter release button - Pentax ZX-7 | ZX-7 Manual - Page 32
When the shutter release button is depressed halfway down, the lens automatically focuses. 2. When the shutter release button is depressed lights up and an audible PCV beeping signal is emitted. • As this camera incorporates the 3-point autofocus system, the subject will be focused properly even if - Pentax ZX-7 | ZX-7 Manual - Page 33
built-in flash pops up even when the lens on your camera is not appropriate for shooting with a flash. For more details on COMPATIBILITY OF F AND FA LENSES WITH THE BUILT-IN FLASH, see page 69 for incompatible lenses. • When the built-in flash is used, using a lens hood is NOT recommended as it may - Pentax ZX-7 | ZX-7 Manual - Page 34
MEM SELECTING THE VARIOUS FLASH MODES BASIC OPERATION (SHOOTING) OFF ON 5- AUTO sim co Tv 125 ") • Av2 2 e__ iA At each press of the flash mode button, the flash mode on the LCD panel switches as shown in the chart. AUTO 4 AUTO 0 Auto-popup Auto-popup Red-eye reduction Non autopopup Non - Pentax ZX-7 | ZX-7 Manual - Page 35
be reduced by taking the photo in a brighter light condition or by shooting with a wider angle 0 lens at a closer distance, or by employing the red- eye reduction flash feature. When using a Pentax dedicated flash unit off the camera, it may also help to position the flash as far away from the - Pentax ZX-7 | ZX-7 Manual - Page 36
is fully charged. • If the built in flash is used continuously, the battery may become warm, but it does not mean the battery is faulty; it is one of the battery's characteristics. • When the built-in flash is used, using a lens hood is NOT recommended as it may obstruct the path of the light - Pentax ZX-7 | ZX-7 Manual - Page 37
Flash effective range for the Auto Picture Mode and Picture Mode with ISO 100 (400) film used Maximum Lens Aperture f/1.4 f/2 f/3.5, f/4.7 f/5.6 Effective Range approx. 0.8 - 3.9m (0.8 - 5.6m) 2.6 - 12.8ft (2.6 - 18.48) approx. 0.8 - 3.3m (0.8 - 4.8m) 2.6 - 10.8ft (2.6 - 15.7ft) approx. 0.7 - 2.4m - Pentax ZX-7 | ZX-7 Manual - Page 38
photograph a subject in low light to warn you of possible camera shake. • In the Shutter-Priority AE Mode and MeteredManual Mode lens, [ will blink in the viewfinder and on the LCD panel when the shutter release button is depressed halfway down. For more details on COMPATIBILITY OF F AND FA LENSES - Pentax ZX-7 | ZX-7 Manual - Page 39
III. ADVANCED OPERATIONS SELECTING A DRIVE MODE This camera has a total of six drive modes as shown. Types of Drive Modes Single-Frame Mode [O] : One picture is taken each time the shutter release button - Pentax ZX-7 | ZX-7 Manual - Page 40
be taken by holding down the shutter release button. How to set Depress the drive mode button until [CI] appears on the LCD panel. • The camera focuses on the subject frame by frame in this mode. • The shutter cannot be released while the built-in flash is being charged. OFF ON - Pentax ZX-7 | ZX-7 Manual - Page 41
in the illustration. • When using accessories such as the finder cap, remove the Eyecup FK. The Eyecup FK comes from the factory fitted to the camera's viewfinder accessory grooves. How to cancel To cancel the self-timer operation after it has been activated, depress the drive mode button again. - Pentax ZX-7 | ZX-7 Manual - Page 42
or manually and then depress the remote control's release button. 2. The self-timer lamp starts blinking slowly. Battery life on the Remote Control About 30,000 commands can be issued using the Remote Control. If the battery is exhausted, please have it replaced at your local Pentax Service center - Pentax ZX-7 | ZX-7 Manual - Page 43
depress the shutter release button on the remote control. • The operating distance of the wireless remote control is 5m from in front of the camera. 4 4. The self-timer lamp blinks rapidly for 3 seconds and then the shutter is released. • When the self-timer lamp blinks rapidly, the audible PCV - Pentax ZX-7 | ZX-7 Manual - Page 44
Adjust the focus by depressing the shutter release button halfway down or manually and then depress the remote control's release button. 2. Aim the remote control transmitter towards the remote control receiver on the camera, and then depress the shutter release button on the remote control. • The - Pentax ZX-7 | ZX-7 Manual - Page 45
until [R] appears on the LCD panel. The frame counter on the LCD panel blinks. 2. Depress the shutter release button to shoot an initial exposure. The film will not advance.The frame counter and [IR] on the LCD panel blink. 3. Recompose the frame and depress the shutter release button to shoot the - Pentax ZX-7 | ZX-7 Manual - Page 46
the panorama lever. The panorama format picture allows horizontally positioned dynamic pictures to be taken (the panorama format is approximately 13x36mm on the film). 1. Turn the panorama lever to [ P to select the panorama format mode. 2. Compose the scene within the panorama format frame in the - Pentax ZX-7 | ZX-7 Manual - Page 47
Please consult the processing lab for more details. • Panorama format processing facilities differ depending on the area and requirement. Your local film processor or camera dealers will advise you on all options available to you. • When the panorama format pictures are printed with a standard size - Pentax ZX-7 | ZX-7 Manual - Page 48
incorporates the Auto Picture Mode function. In this mode, the camera automatically selects the one of 5 picture modes according to the requirement of the scene. You can also select your desired Picture Mode manually. The picture mode has a total of 6 modes as follows. See details for each mode - Pentax ZX-7 | ZX-7 Manual - Page 49
•))1 Tv ' Is() M Av Green Operation Mode For easy picture taking, use the Green Operation Mode. You simply depress the shutter release button. The camera selects the best combination of aperture and shutter speed setting. How to set: Set the mode dial to [ ]. * When the shutter release button is - Pentax ZX-7 | ZX-7 Manual - Page 50
setting are also displayed in the viewfinder and on the LCD panel. In this mode, the telephoto lens produces a portrait in crisp focus against the out-of-focus background, while the wide angle lens enables you to shoot group photography or snapshots in sharp and clear focus with the extended depth - Pentax ZX-7 | ZX-7 Manual - Page 51
Landscape Program Mode A --4006,4 mat OFF ON Qh ) AUTO a Tv 125 6") I ,SAO Av 2 2 a__ 0 This mode is ideal for landscape photography and scenic snapshots. How to set Set the mode dial to [A ]. * When the shutter release button is depressed halfway down, [ A ] is displayed in the viewfinder. - Pentax ZX-7 | ZX-7 Manual - Page 52
SNOLLVII3dO a3ONVACIV 50 Close-up Program Mode O Ja141_1- .1)) Tv ISO M AY a 12S OFF ON E:o0 F22 4 AUTO ENI Tv 125 "" Av22 a__ A This mode is useful for close-up photography. This mode favors smaller apertures to maximize the depth of field, ensuring sharp focus of a closeup subject. - Pentax ZX-7 | ZX-7 Manual - Page 53
Action Program Mode I tt, tan OFF ON S. AUTO Tv 125 a") AV 2 2 This mode selects a faster shutter speed to capture a moving subject. How to set Set the mode dial to [rt.j. * When the shutter release button is depressed halfway down, [X..] is displayed in the viewfinder. The shutter speed and - Pentax ZX-7 | ZX-7 Manual - Page 54
SNOLLVEI3dO 033NVACIV Night-scene Program Mode O .10.4 AUTO PICT •1)) Tv iso IA & This mode is useful when taking a portrait photograph with a night scene in the background. How to set Set the mode dial to pad. OFF ON *34) 'A AUTO Tv I " A Av O__ I * When the shutter release button - Pentax ZX-7 | ZX-7 Manual - Page 55
mode varies on the selection of the camera's mode dial and lens aperture ring setting as shown on the table below. Mode dial AUTO PICT, 4:10 • a, A 6 rvit TV AV M Lens aperture Auto Picture Picture Mode Shutter-Priority Aperture-Priority Metered-Manual Lens set to A position Mode AE AE - Pentax ZX-7 | ZX-7 Manual - Page 56
Using the Aperture-Priority AE Mode Purpose When the desired aperture is selected, an appropriate shutter speed is automatically set by the camera for a proper exposure. This mode is ideal for shooting landscapes with increased depth of field, or a portrait against a blurred background. How to - Pentax ZX-7 | ZX-7 Manual - Page 57
A ], [ i ], [ ] or [ ]• • The approximate aperture indication appears in the viewfinder. It may not the same indication as you select the lens aperture. • When lenses other than an F or FA series are used,no aperture indication will appear n r,OFF ON A win 0 tui $A 4 3° -- Exposure Warning If - Pentax ZX-7 | ZX-7 Manual - Page 58
shutter speed is selected, the appropriate aperture is automatically set by the camera for a proper exposure according to the brightness of the subject. This image with a slow shutter speed. How to set 1. Set the lens aperture ring to [ A ]. 2. Set the mode dial to [ Tv ]. 3. Select - Pentax ZX-7 | ZX-7 Manual - Page 59
OFF ON o Tv 6o "))) g Av 5.6 I n 60 F5.6 OFF ON sow SNOllYti3dO 033NVACIV * When the shutter release button is depressed halfway down, the shutter speed and aperture value will be displayed in the viewfinder and on the LCD panel. The bar underneath the shutter speed indicates that you - Pentax ZX-7 | ZX-7 Manual - Page 60
Mode Purpose The manual exposure mode is a convenient exposure mode for taking pictures using the same shutter speed and aperture setting combination, or taking creatively under- or over-exposed photographs. L OFF ON Tr SO 5.6 0 • I SA IV 01 I Z'AT How to set 1. Set the lens aperture ring to - Pentax ZX-7 | ZX-7 Manual - Page 61
an F or FA lens is used, no approximate aperture indication will appear in the viewfinder. • The memory lock does not operate in the Metered Manual Mode. • The indicator in the viewfinder turns to orange when the shutter speed changes to a slower shutter speed which causes camera shake. • Exposure - Pentax ZX-7 | ZX-7 Manual - Page 62
held down. 7 How to set 1. With the Metered Manual Mode set, move the select lever to change the shutter When using this mode, use a steady tripod to prevent camera shake and attach the optional "Cable Switch F" after removing battery at room temperatures. • The indicator in the viewfinder turns - Pentax ZX-7 | ZX-7 Manual - Page 63
, or compensate for difficult lighting conditions which may fool the camera's built-in exposure meter. How to set 1. While holding . mCz) • Exposure compensation does not work in the O Auto Picture Mode, Metered Manual Mode and m Bulb Exposure Mode. • The exposure compensation range is -3EV to - Pentax ZX-7 | ZX-7 Manual - Page 64
62 TURNING OFF THE AUDIBLE PCV SIGNAL O a r AUTO DOFF d 7-7) ON OFOFN PICT a " SA - SNOIIVEI3dO CG0NVAGV The audible PCV signal can be turned off. How to cancel 1. Set the mode dial to [.)))]. 2. Move the select switch to display [so)] on the LCD panel. • You can change the audible PCV - Pentax ZX-7 | ZX-7 Manual - Page 65
MEMORY LOCK FUNCTION 63 a Ntb (0) SNOIIVIndO 033NVAaV Purpose The memory lock function enables an exposure level lock function to get a correct exposure from a neutral mid-tone area of a high-contrast scene. To set the Memory Lock: 1. Position the area to be measured in the viewfinder metering - Pentax ZX-7 | ZX-7 Manual - Page 66
FOCUSING t 3P ".!4,7F ', \11IJ , fJ I SNOIIVEI3dO 030NVAOV Using a manual-focus lens When mounting a non-autofous lens with a maximum aperture of f/5.6 or larger (f/1.2 to f/5.6), you can use the manual focus mode to focus the lens with the aid of the in-focus indicator [0] in the viewfinder - Pentax ZX-7 | ZX-7 Manual - Page 67
subject in the manual focus mode with the aid of the matte field in the viewfinder as you would with a non-AF SLR camera. a) The in subject comes to the point where the lens was prefocused, the shutter is automatically released. How to use 1. Use a non-autofocus lens. 2. Set the focus mode switch to - Pentax ZX-7 | ZX-7 Manual - Page 68
half mirror incorporated Pentax F SOFT 85mm f/2.8 lens When shooting at a distance closer than approx. 1.5m (4.9ft), set the lens to a manual problem, temporarily set the lens to f/4.5. After focusing on the subject, lock focus, and set the lens to the required f-stop. • The FA Soft 85mm f/2.8 lens - Pentax ZX-7 | ZX-7 Manual - Page 69
. The shutter speed of 1/100 sec. is automatically set when a Pentax non-autofocus lens is in use.When a Pentax non-AF lens is used or the Action 0 Program Mode [Y14/ ] is used, the camera uses the shutter speed of 1/100 second. Metered Manual Mode • When using the built-in flash in the Metered - Pentax ZX-7 | ZX-7 Manual - Page 70
formula above was obtained from the built-in flash. The guide number (GN) depends upon the film speed used as shown below. I S O25 I SO50 ISO100 Calculating the aperture according to the camera -to-subject distance Aperture = Guide Number ÷ Camera-to-subject distance If the calculated aperture - Pentax ZX-7 | ZX-7 Manual - Page 71
FA LENSES WITH THE BUILT-IN FLASH [O = compatible x = incompatible because of vignetting] Lens Name F Fish-Eye Zoom 17-28mm f/3.5-4.5 FA Zoom 20-35mm f/4 between 28-35mm when the camera-to-subject distance is closer than 3m. With the focal length set at 35mm, it will occur when the camera-to- - Pentax ZX-7 | ZX-7 Manual - Page 72
* AA c) 0 egg .1_, Tv MAY a oO; SA SNOLLVEI3dO a33NIM0V This camera automatically reads the fi m speed from the film's DX code. However, the film speed setting can be changed. If you use a non-DX coded film, set the film speed manually. How to set 1. Set the mode dial to [ ISO ]. 2. Move - Pentax ZX-7 | ZX-7 Manual - Page 73
the button with the protrusion part of the camera's strap clamp. Do not press the buttons with an object having a sharp tip. SNOLLVH3dO 033NVAOV SELECT DATE 0 DJUST Adjusting the year/month/day 1. Press the DATE button repeatedly until the date is displayed. 2. Press the SELECT button to make - Pentax ZX-7 | ZX-7 Manual - Page 74
DATE0 lilOODJOUT 1 12IST DATE SELECT UST ; SELECT DATE AO OST SNOLLVEI3dO C13ONVACIV Adjusting the how ,i,inute 1. Press the DATE button repeatedly until the 50°C (32°F - 122`F). • Use DX-coded films with ISO rating from 25 1600. • If high-speed film with an ISO rating of 1000 or faster is used, - Pentax ZX-7 | ZX-7 Manual - Page 75
a picture or the LCD panel becomes weak or invisible. The battery will last for approximately 3 years. The data back uses one 3V lithium battery, type CR2025. 1. Ensure that a film is not loaded, then open the back cover. 2. Loosen the battery cover fixing screw (located near the upper left side of - Pentax ZX-7 | ZX-7 Manual - Page 76
Auto Flash Mode 1. Remove the hot shoe cover FK and attach a Pentax dedicated flash unit to the camera. 2. Turn the flash ON. 3. Set the flash mode to the TTL the viewfinder indicating the flash is ready. Note: Read the operating manual of the flash unit for more details. Using the built-in flash - Pentax ZX-7 | ZX-7 Manual - Page 77
occur. • In the Contrast-Control-Sync Flash Mode, the top flash sync speed is 1/60 of second. Multi-burst flash with the Pentax dedicated flash When discharging more than 2 Pentax dedicated flashes, make sure that they are of the same type, combine the type B with Type C or Type D with Type E. Refer - Pentax ZX-7 | ZX-7 Manual - Page 78
does not operate. *4. Only the Metered Manual Mode can be used. *5. The shutter speed is 1/60 of second or slower. *6. Trailing-shutter-curtain sync flash combined with TYPE B or TYPE C flash. Using other type of a flash Use of non-Pentax flash units may damage the camera. For the best results, use - Pentax ZX-7 | ZX-7 Manual - Page 79
DAYLIGHT-SYNC SHOOTING 4 Purpose In daylight conditions, when a portrait picture is taken with a person's face cast in shadow, discharging the flash will eliminate the shadow. 1. Depress the red-eye reduction flash button to delete Rev from the LCD panel. 2. Confirm either the built-in or - Pentax ZX-7 | ZX-7 Manual - Page 80
Night-scene Program Mode set 1. Set the mode dial to [ 44]. 2. Set the lens aperture ring to [ A ]. 3. The built-in flash pops up automatically. 4. Before to activate the built-in flash. 2. Set the camera's exposure mode to the Metered Manual Mode. 3. Select an appropriate shutter speed (slower than - Pentax ZX-7 | ZX-7 Manual - Page 81
with the guide numbers 14 in meters (ISO 100). • AF Adapter 1.7X An adapter for autofocus photography using a non-autofocus lens with a batteries can attach at the bottom of the camera, instead of using the lithium batteries. • Data Back FG Allowing you to print one of the following modes on the film - Pentax ZX-7 | ZX-7 Manual - Page 82
place the camera body in the back cover. 2. Attach the front case. 3 There is a pocket on the front case so you can store the lens cap. Case Applicable F, FA-lens FKS 20mm, 24mm, 28mm, 35mm, 43mm limited, 50mm f/1.4, f/1.7, 77mm Limited, 135mm, Fish-Eye Zoom 17-28mm, Zoom 20-35mm, Zoom 28-70mm - Pentax ZX-7 | ZX-7 Manual - Page 83
focal length of the lens becomes shorter, or the subject is positioned farther away. 5 4 31 2 IF3.5 1 F4 F5.6 L F11 .-Camera-to-subje distance (m) The Range Allowed for Focusing The in-focus range varies depending on the aperture in use. Zoom lenses do not - Pentax ZX-7 | ZX-7 Manual - Page 84
MD IV OTHERS TROUBLESHOOTING What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items. Symptoms Causes Remedies Reference MEM cn The shutter does not release. Indicators do - Pentax ZX-7 | ZX-7 Manual - Page 85
-in flash does not discharge because the flash light is not required. The camera does not have the power zoom function. Remedies Set the mode dial to another position. Focus manually by using the matte field. Replace the battery. Set the mode dial to another position. Set the exposure mode to Auto - Pentax ZX-7 | ZX-7 Manual - Page 86
Speed range:(1)Auto 1/2000-30 sec.(stepless).(2)Manual 1/2000-30 sec.(3)Bulb, Shutter lock by setting Main switch in OFF position. Pentax KA, bayonet mount (K-mount with AF coupler, lens information contacts) Pentax lenses. KA,-.K.,-. and K-mount lenses are usable. Autofocus is possible using AF - Pentax ZX-7 | ZX-7 Manual - Page 87
mirror with AF secondary mirror Film advances automatically to 1st frame after back cover is closed, Film information window is provided Film (RTF), Guide number:11 (ISO100/m), Illumination angle covers 28mm lens angle of 13.4 oz) body only without batteries Date Model Dimension and weight: 135 - Pentax ZX-7 | ZX-7 Manual - Page 88
5804nr, \\\\ - 6 , -5.6 4 2 -5 14 1 1 1 11 1 11 111 1 1 1 1 1 1 7sec 300 1,5 di 4 / 2s 15 2 a 15 31 .125 203 530 '33c 2ox At ISO 100 with FA28 - 80mm f/3.5 - 5.6 lens Portrait Program Mode L 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 E Pb0 5 45 32 3 • 22 16 11 8 5.6 1.2066 - Pentax ZX-7 | ZX-7 Manual - Page 89
18 11 8 5.0 4 29 -5 14 -6 t i l l 1 1 1 1 1,060 30s 15s 5, 4s 2s Is 2 • 1 1 1 1 1111 15 30 60 125 250 500 1(03 20:0 At ISO 100 with FA28 - 80mm f/3.5 - 5.6 lens Action Program Mode Is, 7 8 9 10 11 12 13 14 15 16 17 16 19 20 21 22 23 EV FN0 32 22 - 16 11 -8 -58 - Pentax ZX-7 | ZX-7 Manual - Page 90
date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions - Pentax ZX-7 | ZX-7 Manual - Page 91
only after you accept the quoted service charge, instruct the service station to proceed with the servicing. The local warranty policies available from Pentax distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with - Pentax ZX-7 | ZX-7 Manual - Page 92
35 lm ernes, I true Eaq. Englexood. Colorado Mil I2. I . SA_ ,letemet..',..km ..IVIIiiIX.CO111: Pentax Canada Inc. 31'1 nine/sal Huse. Mississauga. Ontario 1AX 2F.5. CANADA 56904 ENG This operating manual is patted on recycled paper Copynght Asah, Optical Co Ltd 1999 06 0004 Prvied in Apar
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
 |
 |
PENTAX
ZX-7
OPERATING
MANUAL
'
41
1117111111
\IMMMM
IM
\O=MIEMMI
-`
4
111MMEMMIh.
AMN
IUMMUP
,
4141111Mm_