Pentax ZX-7 ZX-7 Manual - Page 57
aperture blink
UPC - 027075047167
View all Pentax ZX-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
OFFI OI N A * When the shutter release button is depressed halfway down, the shutter speed and aperture value will be displayed in the viewfinder and on the LCD panel. The bar underneath the aperture value indicates that you can change the aperture setting. • The Aperture-Priority AE Mode can also set when the lens aperture rung is set the desired fstop other than [ A ]. Set the mode dial to either [ AUTO PICT ], [ ], [ i ],[ A ], [ i ], [ ] or [ ]• • The approximate aperture indication appears in the viewfinder. It may not the same indication as you select the lens aperture. • When lenses other than an F or FA series are used,no aperture indication will appear n r,OFF ON A win 0 tui $A 4 3° -- Exposure Warning If the subject is too bright or too dark, the selected shutter speed will blink in the viewfinder and on the LCD panel as a warning as shown. When the subject is too bright, choose a smaller aperture, if available; when it is too dark, choose a larger aperture, if available. When the shutter speed indication stops blinking, you can take the picture. If both shutter and aperture blink, it means that the exposure is out of metering range, unable to obtain a correct exposure even if the aperture is adjusted. Select a darker subject if it is too bright, or use a flash if it is too dark. SNO111/1:13d0 COONVACIV