Pfaff 1214 Owner's Manual - Page 13

Threading the need'e with the automatic Pfaff need'e threader Make sure the needle is at its highest point, i. e. on the Pfaff 1222-E the presser bar lifter at the back of the machine should be in its upper position (position A on page 17). On Pfaff machines 1213 and 1214, turn the balance wheel until the needle is at its highest point and the take-up lever is in the position shown in the illustration. Push the needle threader control down with your left hand and at the same time place the needle thread under the hook of the needle threader (Fig. 1). 2 Now push the needle threader control down completely and draw the needle thread under the threader prong (Fig. 2). Release the needle threader control slightly until the prong reverses and pulls the thread through the needle eye (Fig. 3). Fully release the control, take hold of the thread loop and pull the thread through the needle eye completely. On Pfaff machines 1213 and 1214, turn the balance wheel to bring the take-up lever to its highest point (Fig page 10) On the Pfaff 1222-E, return the presser bar lifter to its normal (horizontal) position (B on page 17). 3