Pfaff creative 1472 Owner's Manual - Page 15

4 Raising the presser bar lifter: When you have finished a seam the needle must be fully raised. Then raise presser bar lifter 17. J / Removing the work from the machine and cutting the threads: Remove the material to the rear and pull the threads in sewing direction into thread cutter 37 in order to cut them Important! When the main switch is pressed to switch the machine on, the sewing lamp lights up When the machine is switched off by pressing the main switch, removing the mains plug or by power failure, the program memory in the computer is saved by a battery back-up. When the machine is switched on again, program 00 (straight stitch with needle in middle position) appears. All program combinations entered into any memory are retained automatically. If a program is entered during sewing. it will not become effective until the machine is stopped and the foot con trol is pressed again. The stitch width and stitch length can be changed during sewing For bobbin winding disengage the sewing action. After bobbin winding engage the sewing action again. Owing to the use of electronic compo nents this machine becomes warm during operation. This is quite normal and of no consequence. Batteries: When the machine is switched on and the word "batterY" is displayed contin uously in four languages, the battery tension is no longer sufficient. The batteries must then be replaced by new ones (see page 43). When a pro gram is selected the word 'battery" disappears from the display. 26 H 2 :'