Pfaff creative 1472 Owner's Manual - Page 9

7 Winding from a second spool: Swing bobbin winder thread guide 44 to the front Pull the thread into guide 40, into bobbin winder tension A and around finger B Now pass the thread to bobbin winder 25 and wind it a few times clockwise around the bobbin Press the bobbin to the right Then turn on the main switch, press the foot control and wind the bobbin. Press the full bobbin to the left and cut the thread using thread cutter 37. Bobbins are wound in the same way from reel holder 45 Important: If an empty M-memory is selected, it is not possible to wind the bobbin A program between 00 and 99 must be selected. If the spool has a thread slot, the slot must face to the right when the spool is placed on 14 €1 (gaging the sewing action: hold the hand wheel firmly and turn disc 4 to the rear Then turn the hand wheel to the front until it engages. - Winding through the needle Only with metal sewing foot! Swing bobbin winder thread guide 44 to the front Raise sewing foot. Switch on the dual feed. Set needle at foB position. Place bobbin on bobbin winder 25. Disen gage sewing action. Pull the needle thread under the sewing foot to the right and through guide 44 (into open ng A and around finger B, see illustra tion). Wind the thread a few times clockwise around the bobbin and press it to the right Then turn on the main switch, press the foot control and wind the bobbin. Push the full bobbin to the left, remove it and cut the thread using thread cutter 37 Important: If an empty M-memory is selected, it is not possible to wind the bobbin. A program between 00 and 99 must he selected. Engaging the sewing action: hold the hand wheel firmly and lurn disc 4 to the rear Then turn the hand wheel to tefrontuntildengages - 15