Pfaff creative 1472 Owner's Manual - Page 185
ppIiqué
View all Pfaff creative 1472 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
ppIiqué work or this, two worksteps are required. irst workstep prog 10 ( -- E 2-3 2A Stitch width: 0.5 mm Stitch length: 1.0 mm second workstep prog 10 -- E 2-3 2A Stitch width: 1.5 mm Stitch length: 0.2 to 0.25 mm (for cording) rrace the design on the reverse side of the fabric, ay the appliqué on the face side and baste it on, making sure it matches the fabric grain. First workstep Sew along the outline of the design on the wrong side (Fig. 1). Trim the excess material close to the contour seam (Fig. 2). Second workstep Sew over the raw edges of the appliqué with nar row, dense zigzag (purl) stitches (Fig. 3). To make the edge of the appliqué more promi nent, insert a filler cord in the seam. Ready-made fabric appliqués can be applied much more easily. Before you cut out the design, iron on a fusible backing. This reinforcesthe mate rial, makes it easier to cut, and prevents fraying. Baste on the design. Place three layers of tissue E paper under the fabric and sew along the edges of the design with dense, narrow zigzag stitches. In this way, a goocHooking seam is produced. • For cording we recommend the appliqué foot (special accessory) E E E F I