Pfaff creative 1472 Owner's Manual - Page 169
Adapting, buttonhole, length
View all Pfaff creative 1472 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
prog J 3 Adapting the buttonhole length A garment may consist of different numbers of fabric plies, e. g. the buttonhole strip may consist of three plies and the collar stand of six - owing to the folded seam edge. In this case it is necessary to program the buttonhole for varying numbers of fabric plies in order to maintain the same button hole length as on the three-ply buttonhole strip. Note: For sewing buttonholes on knitted or very thin materials we recommend sewing foot No. 1 A and dual feed. If the buttonhole seams do not coincide, press 'tie-off/buttonhole" key 19 to switch from fully automatic to semi-automatic during sewing; one segment flashes (Fig. 3) and you can determine your own second bartack. When key 19 is pressed again the buttonhole pro 6 grammed before is sewn fully automatically and the segment does not flash anymore. After sewing, cut the buttonholes open (see page 94).