Pfaff creative 1472 Owner's Manual - Page 157

4 iH[irmr 11111 I1ll1, Automatic darning [ prog ( -- -3+'2A,5A Sewing thread: embroidering and darning thread The darning program 94 is mainly intended for darning damaged spots. Stitch over the damaged spot at the required length, then press the "reverse' key. The length of the darning seam is now memorized in the computer. The Pfaff Crea tive then automatically stitches over the damaged area. The programmed darn size can then be repeated as often as required. If the worn area is wider than the darning program, the darning program must be repeated several times until the damaged spot has been covered completely. Depending on the fabric, the darn may turn out one-sided. If so, this can be compensated by bal ance key 5. Example: Fig. 1: Using balance key, select ÷ 1 to + 3 or more, if required. Fig. 2: Using balance key, select - ito -3 or more, if required. If you wish to darn a larger area we recommend to use buttonhole foot 5A. The darning program must be repeated several times until the damaged spot has been covered. Changing the darning length If you wish to change the programmed darning length, press the pattern start key". The darning length is cleared and a new length can be pro grammed. 73