Philips DVDR3320V User manual - Page 13

Hookup and Settings Connecting an Antenna or Cable TV a Antenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your Recorder. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over the ANT.IN jack. Don't attempt to screw it into to the Recorder. b Cable TV: If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANT.IN jack on the Recorder. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the converter to the ANT.IN on your Recorder. This cable hookup permits both TV and Recorder operation. To view or record a CATV channel 1. Tune the TV to the Recorder output channel (CH 3 or 4). 2. Set the Recorder channel selector to the cable output channel. (Example: CH3) 3. Select a channel using the cable converter. Notes: • With this connection, you cannot record one program while viewing another. • If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set. Connections to your TV Make one of the following connections, depending on the capabilities of your TV. a Antenna Antenna OR OR Rear of Recorder b 13