Philips DVDR3320V User manual - Page 15

Hookup and Settings Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS) 1. Connect one of the Recorder's DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (COAXIAL X) audio cable. 2. You will need to activate the Recorder 's digital output. (See [Audio Settings] on page 21). Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your Recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. C a u t i o n: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. Notes: • If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. • Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. • To see the audio format of the current DVD in the onscreen display, press AUDIO. • This Recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this Recorder to a DTS compatible receiver via one of this Recorder's digital audio outputs. Rear of Recorder Front of Recorder Connecting a Digital Camcorder Use a DV cable (not supplied) to connect the DV in/out jack of your DV Digital Camcorder to the front panel DV IN jack of this Recorder. Note: This jack is for connection to DV equipment only. It is not compatible with digital satellite tuners or D-VHS video decks. Front of Recorder Accessory Audio/Video (A/V) Connections to Recorder Connect the AV 1 IN or AV 2 IN jacks on the Recorder to the audio/video out jacks on your accessory component, using the optional audio/video cables. (Refer to page 37 for [Recording from External Components].) Note: If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available. DV Digital Camcorder DV IN/OUT 15