Philips HTS3400 User manual - Page 13
Step 4, Connecting FM/AM, antennas, Step 5, Connecting the, power cord - system
View all Philips HTS3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Step 4: Connecting FM/AM antennas Connections Step 5: Connecting the power cord fix the claw into the slot ➠ AM antenna 1 FM antenna 2 1 ~ AC MAINS Power Outlet 1 Connect the supplied AM loop antenna to the AM jack. Place the AM loop antenna on a shelf or attach it to a stand or wall. 2 Connect the supplied FM antenna to the FM (75Ω) jack. Extend the FM antenna and fix its ends to the wall. For better FM stereo reception, connect an external FM antenna (not supplied.) After everything is connected properly, 1 Plug the AC power cord into the power outlet. 2 Never make or change any connections with the power switched on. Helpful Hint: - Refer to the type plate on the rear or bottom of the system for identification and supply ratings. Helpful Hints: - Adjust the position of the antennas for optimal reception. - Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference. 13