Philips HTS9800W User manual - Page 46

English Tuner Operations Tuning to radio stations A Press SOURCE button until "TUNER FM" appears on the display panel. B Press S / T briefly on the remote control. The display panel will show "SEARCH" until a radio station with sufficient signal strength is found. C Repeat step B if necessary until you find the desired radio station. D To fine-tune the reception of a weak station, press . / > briefly and repeatedly until an optimal reception is found. Using auto install This feature is only applicable for the first time radio station programming. You will be prompted for installing the radio stations once you access the tuner mode. With one touch of the button, all the available radio stations will be stored automatically. DVD System's display panel A AUTO INSTALL .... B INSTALL TUNER Helpful Hints: - If the FM radio station is transmitting RDS (Radio Data System) data, the RDS name will be displayed and stored. Presetting radio stations You can store up to 40 FM preset radio stations in the system's memory. There are three different ways to program the radio stations: - Using auto install (for first time setup only) - Using automatic preset - Using manual preset 2 1 A Press SOURCE on the system panel to select TUNER mode. "AUTO INSTALL PRESS PLAY" appears. B Press and hold u (PLAY PAUSE) on the system panel until "INSTALL TUNER" appears on the display panel. All the available radio stations with strong signal strength will be stored automatically. Once complete, the last tuned radio station will be played back. Helpful Hints: - The system will exit presetting mode if no button is pressed within 20 seconds. - If no valid frequency is detected during tuner installation, "PLEASE CHECK FM ANTENNA" appears. 46