Pioneer AVIC-X920BT Installation Manual - Page 13
Violet/White REVERSE GEAR SIGNAL INPUT - pictures
UPC - 884938104241
View all Pioneer AVIC-X920BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting the System The navigation unit English Section 03 Power cord Violet/White (REVERSE GEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your vehicle traveling forward/backward properly, and thus the position of your vehicle detected by the sensor may be misaligned from the actual position. Note When you use a rear view camera, please make sure to connect this lead. Otherwise you cannot switch to rear view camera picture. En 13
Power cord
Violet/White (REVERSE GEAR SIGNAL INPUT)
This is connected so that the navigation system can detect
whether the vehicle is moving forwards or backwards.
Connect the violet/white lead to the lead whose voltage
changes when the shift lever is put in reverse. Unless
connected, the sensor may not detect your vehicle traveling
forward/backward properly, and thus the position of your
vehicle detected by the sensor may be misaligned from the
actual position.
When you use a rear view camera, please make
sure to connect this lead. Otherwise you cannot
switch to rear view camera picture.
Note
The navigation unit
En
13
English
Section
03
Connecting the System