Pioneer BDP-V6000 Owner's Manual - Page 69

Problem • No sound is output. • Sound is not output properly. Check Remedy 09 Are you trying to listen to the Audio signals are not output from the HDMI OUT terminal when video sound of the HDMI OUT signals are being output from the COMPONENT VIDEO or VIDEO terminal while watching the output terminals. When watching the picture of the COMPONENT picture from the VIDEO or VIDEO output terminals, connect an optical digital audio COMPONENT VIDEO or cable or regular audio cables to listen to the sound (page 21). Once VIDEO output terminals? connections are completed, use Setup Navigator to make the player's settings (page 23). Is HDMI Audio Out properly Set HDMI Audio Out to Auto or PCM. (page 44). set? Is Output Terminal properly When ANALOG AUDIO is selected at Output Terminal, no audio set? signals are output from the HDMI OUT or DIGITAL OUT terminal (page 51). Is the output video resolution Use OUTPUT RESOLUTION to switch to the resolution at which the properly set? video and audio signals are output (page 27). Is the AV receiver or To listen to 2-channel analog audio, connect to FRONT (L/R) of the amplifier, etc., connected to AUDIO OUT terminals (page 13) and set Audio Output Mode to 2 the AUDIO OUT terminals? Channel (page 43). Are the speakers properly set? When the AV receiver or amplifier, etc., is connected to the AUDIO OUT terminals and Audio Output Mode is set to Multi-channel, set Speaker Setup properly (page 47). Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI device is connected. Connect the device to a DIGITAL OUT terminal or the AUDIO OUT terminals (page 21). For some BDs, audio signals are only output from DIGITAL OUT terminal or the HDMI OUT terminal. Multi-channel sound is not output. Is Output Terminal properly Linear PCM (2-channel) audio signals are output from output terminals set? other than the one set at Output Terminal under Audio Out. Set Output Terminal properly (page 51). Is the audio output of the Read the operating instructions of the connected AV receiver or connected AV receiver or amplifier and check the audio output settings of AV receiver or amplifier, etc., properly set? amplifier. Is multi-channel sound selected? Use the menu screen or AUDIO to switch the disc's sound to multichannel. Is the AV receiver or When the AV receiver or amplifier, etc., is connected to the AUDIO amplifier, etc., connected to OUT terminals, set Audio Output Mode to Multi-channel (page 43). the AUDIO OUT terminals? Also, set Speaker Setup properly (page 47). Noise can be heard when outputting DTS Digital Surround signals from the DIGITAL OUT terminal. Is the connected AV receiver If an AV receiver or amplifier that is not compatible with DTS Digital or amplifier compatible with Surround is connected to the DIGITAL OUT terminal, set DTS Out to DTS Digital Surround? DTS  PCM (page 43). 192 kHz or 96 kHz digital audio signals cannot be output from the DIGITAL OUT terminal. It is not possible to output 192 kHz or 96 kHz digital audio signals from this player's DIGITAL OUT terminal. The signals are automatically converted to 48 kHz or less for output. Secondary audio or interactive audio is not output. Is HDMI Audio Out properly When listening to the sound from an HDMI OUT terminal, set HDMI set? Audio Out to PCM (page 44). Are Dolby Digital Out and When listening to the sound from an DIGITAL OUT terminal, set Dolby DTS Out properly set? Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 43). Sound is fast or slow. When an HDMI cable is When a Pioneer AV receiver or amplifier compatible with the PQLS connected, are audio signals function is connected directly to the player's HDMI OUT terminal using being output from devices an HDMI cable, the PQLS function is activated when playing discs. connected with cables other Because of this, the sound output from components other than the than HDMI cables? ones connected by HDMI cable may be fast or slow. If this happens, set PQLS to Off (page 44). After a disc is inserted, Are there too many files Loading stays displayed and recorded on the disc? playback does not start. When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes.  is displayed in file names, etc. The characters that cannot be displayed on this player are displayed in . 69 En