Pioneer DEQ 7600 Operation Manual - Page 20
Nuance, Control
UPC - 012562381916
View all Pioneer DEQ 7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Adjusting the Equalizer Curve Nuance Control Overall adjustment of the effect of equalizer curve (Nuance Control) is possible. 1. Select the Nuance Control mode. Each press changes the mode 0 GI DI 31 TS IN I.. 3 ► • r ig s un natal.'" LIM .1112 Nuance Control mode Each press of the M button selects the adjusting mode in the following order: Fader/Balance mode -0. Nuance Control mode Graphic Equalizer mode To cancel the Nuance Control mode, press the D button. 2. Recall the equalizer curve to be adjusted. Refer to "Recalling an Equalizer Curve" on page 17. Note: • A user's curve in which no equalizer curve has been preset (= flat curve) can not be adjusted with Nuance Control. 3. Perform overall adjustment of the equalizer curve. PI tt 0 GI gi n III • • 0111UM IP 13. h • In 3.• t_in MK 33 MK /MP 1.1.1 WV pe Note: • You can adjust over a range of -6 to 6, but this may be too narrow, depending on the equalizer curve you recall. • The Nuance Control can be applied separately to the factory curves and user's curves. • The condition after Nuance Control of each factory curve or user's curve is stored as the setting value for than curve. The next time the factory curve or user's curve is recalled, the equalizer curve after nuance control will be recalled. • After selecting the Nuance Control mode, if you do not perform an operation within about 25 seconds, the Nuance Control mode is canceled, and the display returns to spectrum analyzer indications.