32
En
Specifications
General
Power requirements
.............................................................
AC 120 V, 60 Hz
Power consumption
...............................................................................
42 W
Power consumption (standby)
.............................................................
0.4 W
Main unit weight
.....................................................................
8.6 kg (10.4 lb)
Max. dimensions
....................
430 mm (W) × 107.9 mm (H) × 404 mm (D)
(16.9 in. (W) × 4.2 in. (H) × 15.9 in. (D))
Tolerable operating temperature
.........
+5 °C to +35 °C (+41 °F to +95 °F)
Tolerable operating humidity
......................
5 % to 85 % (no condensation)
Audio Section
Sampling rate
......................................................................................
96 kHz
A/D, D/A converter
...............................................................................
24 bits
Frequency characteristic
CD
/
LINE
/
MIC
...................................................................
20 Hz to 20 kHz
S/N ratio (rated output)
PHONO
............................................................................................
93 dB
CD
/
DIGITAL
,
LINE
........................................................................
107 dB
MIC
..................................................................................................
85 dB
Total harmonic distortion (
LINE
—
MASTER1
)
................................
0.004 %
Standard input level / Input impedance
PHONO
.............................................................................
–52 dBu/47 k
W
CD
/
LINE
............................................................................
–12 dBu/47 k
W
MIC
..................................................................................
–52 dBu/8.5 k
W
RETURN
............................................................................
–12 dBu/49 k
W
Standard output level / Load impedance / Output impedance
MASTER1
....................................................
+8 dBu/10 k
W
/3
W
or lower
MASTER2
..................................................
+2 dBu/10 k
W
/22
W
or lower
REC OUT
.....................................................
–8 dBu/10 k
W
/22
W
or lower
BOOTH
......................................................
+8 dBu/10 k
W
/1 k
W
or lower
SEND
.........................................................
–12 dBu/10 k
W
/1 k
W
or lower
PHONES
.....................................................
+8.5 dBu/32
W
/1
W
or lower
Rated output level / Load impedance
MASTER1
........................................................................
+26 dBu/10 k
W
MASTER2
........................................................................
+20 dBu/10 k
W
Crosstalk (
LINE
)
....................................................................................
82 dB
Channel equalizer characteristic
HI
.....................................................................
–26 dB to +6 dB (13 kHz)
MID
....................................................................
–26 dB to +6 dB (1 kHz)
LOW
..................................................................
–26 dB to +6 dB (70 Hz)
Microphone equalizer characteristic
HI
...................................................................
–12 dB to +12 dB (10 kHz)
LOW
..............................................................
–12 dB to +12 dB (100 Hz)
Input / Output terminals
PHONO
input terminal
RCA pin jack
....................................................................................
2 sets
CD
input terminal
RCA pin jacks
..................................................................................
4 sets
LINE
input terminal
RCA pin jack
....................................................................................
2 sets
MIC
input terminal
XLR connector/phone jack (
Ø
6.3 mm)
...........................................
1 set
RETURN
Input terminals
Phone jack (
Ø
6.3 mm)
.....................................................................
1 set
DIGITAL IN
coaxial input terminal
RCA pin jacks
..................................................................................
4 sets
MASTER
output terminal
XLR connector
...................................................................................
1 set
RCA pin jacks
....................................................................................
1 set
BOOTH
output terminal
Phone jack (
Ø
6.3 mm)
.....................................................................
1 set
REC OUT
output terminal
RCA pin jacks
....................................................................................
1 set
SEND
output terminal
Phone jack (
Ø
6.3 mm)
.....................................................................
1 set
DIGITAL OUT
coaxial output terminal
RCA pin jacks
....................................................................................
1 set
MIDI OUT
terminal
5P DIN
...............................................................................................
1 set
PHONES
output terminal
Stereo phone jack (
Ø
6.3 mm)
.........................................................
1 set
USB
terminal
B type
.................................................................................................
1 set
CONTROL
terminal
Mini phone jack (
Ø
3.5 mm)
...........................................................
2 sets
LINK
terminal
LAN terminal (100Base-TX)
............................................................
6 sets
—
The specifications and design of this product are subject to
change without notice.
—
Be sure to use the [
MASTER1
] terminals only for a balanced
output. Connection with an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or converter adapter), etc.,
may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the
[
MASTER2
] terminals.
!
©
2012 PIONEER CORPORATION. All rights reserved.