Pioneer VSX-1015TX Owner's Manual - Page 26

04 Controls and displays Display 1 2 3 4 5 67 8 9 SIGNAL DIGITAL DIGITAL L C R LFE PL Neo 6 THX DVD TV DVR AUTO ANALOG DTS LS S RS ADV. SURR VIR.SB CD CD-R TUNER SP A B SLEEP SR WMA9 Pro AUTO SURR MONO STEREO TUNED DE MIDNIGHT LOUDNESS VIDEO1 VIDEO2 ATT OVER dB 16 15 6 14 13 12 11 10 1 Speaker indicators (page 58) Lights to indicate the current speaker system, A and/or B. 2 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: AUTO Lights when AUTO signal select is on. DIGITAL Lights when a digital audio signal is detected. ANALOG Lights when an analog signal is detected. 3 Digital format indicators 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. DTS Lights when a DTS encoded signal is detected. WMA9 Pro Lights to indicate decoding of a WMA9 Pro signal. 4 Program format indicators These change according to which channels are active in Dolby and DTS encoded sources. LS, S and RS will light at the same time to indicate 6.1channel sources. • L - Left front channel • C - Center channel • R - Right front channel • LS - Left surround channel • S - Surround channel (mono) or surround back channel • RS - Right surround channel • LFE - Low frequency effects channel 5 Matrix decoding format indicators 2PLII This lights to indicate Pro Logic II / Pro Logic IIx decoding (see Listening in surround sound on page 31 for more on this). Neo:6 When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (see Listening in surround sound on page 31 for more on this). 6 Listening mode indicators THX Lights when one of the Home THX modes is selected. VIR.SB Lights during Virtual surround back processing. ADV.SURR Lights when one of the Advanced Surround modes has been selected. AUTO SURR Lights when the Auto Surround feature is switched on (see Auto playback on page 31). 7 MIDNIGHT / LOUDNESS When Midnight or Loudness listening is switched on, the corresponding indicator shows in the display. 8 Input source indicators Light to indicate the input source you have selected. 9 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 10 OVER Lights to indicate that the level of an analog source is too high. Use the attenuator (INPUT ATT) to reduce it. 11 Master volume level Shows the overall volume level. -80dB indicates the minimum level, and +12dB indicates the maximum level. 26 En